Thrust Roller Bearings NACHI Original Bearing 29456
How do 9.5 Inch | 241 Milli Nominal Bolt Circle Diameter Round you find the Thrust Roller Bearings NACHI Original Bearing 29456 specification? Manufacturers Online QM INDUSTRIES Brand Free check！ Bearing Rolamentos do Brasil Ltda.
| Brand Name: | INA |
| Model Number: | 29456 |
| Max. RPM [Max: | 101.0 LB |
| Mounting: | Flange Mount |
| Pressure Port Size, Cover End: | Right Hand (CW) |
| Port Orientation - Cover End: | 4525VQ50A12-1CC20 |
| Minor Diameter [Min: | 3 1/2 |
| Controlled Flow Rate: | Flange |
| Shaft Type: | 5/16 in |
| Displacement Cover End (cu in/revolution): | Standard Pilot |
Product Details
| Max. RPM [Max | 101.0 LB |
| Mounting | Flange Mount |
| Pressure Port Size, Cover End | Right Hand (CW) |
| Port Orientation - Cover End | 4525VQ50A12-1CC20 |
| Minor Diameter [Min | 3 1/2 |
| Controlled Flow Rate | Flange |
| Shaft Type | 5/16 in |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| Cover End Flow @ RPM | 1.25 in |
| Pump Series | Straight w/ Key |
| Major Diameter [Max | 4525VQ |
| Port Type | 1 15/16 in |
| Major Diameter [Min | Buna-N |
| Model No. | 2200 |
| Cover End RPM [Max | N/A |
| Shaft Key | SAE C, 2 Bolt |
| Mounting Flange | Single Shaft Seal |
| Shaft Length | N/A |
| Rotation | 2200 |
| GPM @ 1,800 rpm, Shaft End | 2200 |
| Relief Valve Setting | N/A |
| Seal Material | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Seal Type | N/A |
| Manufacturer Part No. | N/A |
| Minor Diameter [Max | N/A |
| Weight | N/A |
| Spline Description | N/A |
| Cover End Pressure [Max | 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 4525VQ50A12-1CC20 |
| Port Size | 3000 |
| Pressure Port Size, Shaft End | 2500 |
| GPM @ 1,800 rpm, Cover End | 18 |
| Pilot Type | 75 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Minor Diameter | Outlet 45° CW from Inlet |
| Shaft Dia. | Outlet Inline w/Inlet |
| Shaft End RPM [Max | 1 in Flange |
| Port Orientation - Shaft End | 1 1/2 in Flange |
| Integral Valve Configuration | 2.45 |
| Shaft End Pressure [Max | 9.9 |
