2.125 Inch | 53.975 Millimeter x 2.189 Inch | 55.6 Millimeter x 2.438 Inch | 61.925 Millimeter NTN UCPL-2.1/8 Pillow Block Bearings
What is 160 Width (mm) the best place 2.125 Inch | 53.975 Millimeter x 2.189 Inch | 55.6 Millimeter x 2.438 Inch | 61.925 Millimeter to buy 2.125 Inch | 53.975 Millimeter x 2.189 Inch | 55.6 Millimeter x 2.438 Inch | 61.925 Millimeter NTN UCPL-2.1/8 Pillow Block Bearings online? NTN Bearing Manufacturing Bearing Rolamentos do Brasil Ltda. Service .
What is UCPL-2.1/8 bearing interchange?
Brand Name: | NTN |
Model Number: | UCPL-2.1/8 |
Pressure Port Size, Shaft End: | 45.0 LB |
Shaft Type: | Flange Mount |
Cover End Flow @ RPM: | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: | 2520VQ21A12-11BC20-LH |
Weight: | 2.5 |
Shaft Dia.: | Flange |
Shaft End Pressure [Max: | N/A |
Shaft End Flow @ RPM: | Standard Pilot |
Product Details
Pressure Port Size, Shaft End | 45.0 LB |
Shaft Type | Flange Mount |
Cover End Flow @ RPM | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End | 2520VQ21A12-11BC20-LH |
Weight | 2.5 |
Shaft Dia. | Flange |
Shaft End Pressure [Max | N/A |
Shaft End Flow @ RPM | Standard Pilot |
Shaft Length | 0.875 in |
Cover End Pressure [Max | 13 Tooth Splined |
Port Type | 2520VQ |
Controlled Flow Rate | 1 3/8 in |
Port Size | Double |
Shaft Key | Buna-N |
GPM @ 1,800 rpm, Shaft End | 2500 |
Rotation | 0.715 in |
Spline Description | SAE B, 2 Bolt |
Minor Diameter | Single Shaft Seal |
Shaft End RPM [Max | 16/32 |
Major Diameter [Max | 2700 |
Model No. | 2500 |
Minor Diameter [Max | N/A |
Displacement Shaft End (cu in/revolution) | 4.1 |
Pressure Port Size, Cover End | 0.873 in |
Seal Material | 0.872 in |
Major Diameter [Min | N/A |
Manufacturer Part No. | N/A |
Cover End RPM [Max | N/A |
Shaft Seal Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Port Orientation - Cover End | 2520VQ21A12-11BC20-LH |
Pilot Type | 2300 |
Integral Valve Configuration | 3000 |
Mounting | 18 |
Relief Valve Setting | 31.5 |
Max. RPM [Max | w/o Integral Valves |
Pump Series | Outlet 45° CW from Inlet |
Mounting Flange | Outlet 90° CCW from Inlet |
Minor Diameter [Min | 3/4 in Flange |
Port Orientation - Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 2.4 |