NTN 87007 Single Row Ball Bearings
Can't find Bearing Rolamentos do Brasil Ltda. what you're looking for NTN 87007 Single Row Ball Bearings ? Our expert NTN Bearing 173 mm dd (min) Representatives be in contact with you 262 mm Da (max) shortly! 4 mm Fillet Radius/Chamfer
What is 87007 bearing interchange?
Brand Name: | NTN |
Model Number: | 87007 |
Shaft Seal Type: | 30.0 LB |
Integral Valve Configuration: | Flange Mount |
Displacement Cover End (cu in/revolution): | Right Hand (CW) |
Minor Diameter [Max: | V2010-1F11S6S-11BB12 |
Pilot Type: | 1 1/2 |
Port Orientation - Cover End: | Flange |
Max. RPM [Max: | N/A |
Mounting: | N/A |
Product Details
Shaft Seal Type | 30.0 LB |
Integral Valve Configuration | Flange Mount |
Displacement Cover End (cu in/revolution) | Right Hand (CW) |
Minor Diameter [Max | V2010-1F11S6S-11BB12 |
Pilot Type | 1 1/2 |
Port Orientation - Cover End | Flange |
Max. RPM [Max | N/A |
Mounting | N/A |
GPM @ 1,800 rpm, Cover End | 0.875 in |
Relief Valve Setting | 13 Tooth Splined |
Rotation | V2010 |
Pressure Port Size, Shaft End | 1 5/16 in |
Model No. | Buna-N |
Seal Material | 2500 |
GPM @ 1,800 rpm, Shaft End | 0.728 in |
Port Type | SAE B, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Port Size | 16/32 |
Pump Series | 3000 |
Port Orientation - Shaft End | 2500 |
Shaft End Flow @ RPM | N/A |
Weight | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Spline Description | 0.873 in |
Minor Diameter [Min | 0.872 in |
Mounting Flange | 0.7335 in |
Displacement Shaft End (cu in/revolution) | 0.7225 in |
Shaft End RPM [Max | N/A |
Minor Diameter | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | V2010-1F11S6S-11BB12 |
Shaft Key | 2200 |
Shaft Length | 2500 |
Cover End Flow @ RPM | 9 |
Cover End RPM [Max | 16.5 |
Major Diameter [Min | N/A |
Shaft Type | Outlet 45° CCW from Inlet |
Manufacturer Part No. | Outlet 90° CCW from Inlet |
Shaft End Pressure [Max | 1/2 in SAE O-Ring |
Shaft Dia. | 3/4 in SAE O-Ring |
Controlled Flow Rate | 1.19 |
Major Diameter [Max | 2.22 |