2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter KOYO IR-4016 Needle Non Thrust Roller Bearings
100% Authentic. 2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter KOYO IR-4016 Needle Non Thrust Roller Bearings Highest 2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter Quality. Certified Bearing Rolamentos do Brasil Ltda. Supplier.
What is IR-4016 bearing interchange?
Brand Name: | KOYO |
Model Number: | IR-4016 |
Port Size: | 45.0 LB |
Shaft Dia.: | Flange Mount |
Pump Series: | Left Hand (CCW) |
Port Orientation - Cover End: | 2520VQ17A12-1CC20LH |
Major Diameter [Min: | 2 1/2 |
Shaft Seal Type: | Flange |
Minor Diameter [Min: | 3/16 in |
Cover End Pressure [Max: | Standard Pilot |
Product Details
Port Size | 45.0 LB |
Shaft Dia. | Flange Mount |
Pump Series | Left Hand (CCW) |
Port Orientation - Cover End | 2520VQ17A12-1CC20LH |
Major Diameter [Min | 2 1/2 |
Shaft Seal Type | Flange |
Minor Diameter [Min | 3/16 in |
Cover End Pressure [Max | Standard Pilot |
Spline Description | 0.875 in |
Cover End Flow @ RPM | Straight w/ Key |
GPM @ 1,800 rpm, Cover End | 2520VQ |
Shaft Length | 1 15/16 in |
Displacement Cover End (cu in/revolution) | Buna-N |
Port Type | 2500 |
Pilot Type | N/A |
Major Diameter [Max | SAE B, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Controlled Flow Rate | N/A |
Minor Diameter [Max | 2700 |
Shaft Type | 2500 |
Pressure Port Size, Cover End | N/A |
Seal Material | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Port Orientation - Shaft End | N/A |
Integral Valve Configuration | N/A |
Mounting | N/A |
Rotation | N/A |
Shaft End RPM [Max | N/A |
Model No. | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Minor Diameter | 2520VQ17A12-1CC20LH |
GPM @ 1,800 rpm, Shaft End | 2300 |
Shaft Key | 3000 |
Relief Valve Setting | 18 |
Shaft End Flow @ RPM | 25.5 |
Manufacturer Part No. | w/o Integral Valves |
Weight | Outlet 45° CW from Inlet |
Max. RPM [Max | Outlet Inline w/Inlet |
Shaft End Pressure [Max | 3/4 in Flange |
Displacement Shaft End (cu in/revolution) | 1 in Flange |
Mounting Flange | 2.41 |
Cover End RPM [Max | 3.37 |