1.85 Inch | 47 Millimeter x 2.165 Inch | 55 Millimeter x 1.102 Inch | 28 Millimeter INA K47X55X28 Needle Non Thrust Roller Bearings
Our highly-skilled and Radial Load Direction factory-trained service experts have the resources to help you Punching Retainer Type with all your 1.85 Inch | 47 Millimeter x 2.165 Inch | 55 Millimeter x 1.102 Inch | 28 Millimeter INA K47X55X28 Needle Non Thrust Roller Bearings needs - including routine maintenance, major repairs, warranty service, and Bearing Rolamentos do Brasil Ltda. INA Bearing equipment 1.85 Inch | 47 Millimeter x 2.165 Inch | 55 Millimeter x 1.102 Inch | 28 Millimeter inspections.
What is K47X55X28 bearing interchange?
Brand Name: | INA |
Model Number: | K47X55X28 |
Weight: | 101.0 LB |
Pressure Port Size, Cover End: | Flange Mount |
Displacement Shaft End (cu in/revolution): | Left Hand (CCW) |
Shaft Key: | 4525VQ42A21-11AA20-LH |
Minor Diameter: | 3 1/2 |
Port Orientation - Cover End: | Flange |
Shaft End RPM [Max: | N/A |
Rotation: | Standard Pilot |
Product Details
Weight | 101.0 LB |
Pressure Port Size, Cover End | Flange Mount |
Displacement Shaft End (cu in/revolution) | Left Hand (CCW) |
Shaft Key | 4525VQ42A21-11AA20-LH |
Minor Diameter | 3 1/2 |
Port Orientation - Cover End | Flange |
Shaft End RPM [Max | N/A |
Rotation | Standard Pilot |
Pump Series | 1.25 in |
Cover End Pressure [Max | 14 Tooth Splined |
Port Size | 4525VQ |
Shaft End Flow @ RPM | 1.9375 in |
Major Diameter [Max | Buna-N |
Manufacturer Part No. | 2200 |
Minor Diameter [Min | 1.04 in |
Mounting | SAE C, 2 Bolt |
Port Type | Single Shaft Seal |
Major Diameter [Min | 12/24 |
Shaft Dia. | 2200 |
Port Orientation - Shaft End | 2200 |
Max. RPM [Max | N/A |
Mounting Flange | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Spline Description | 1.248 in |
Minor Diameter [Max | 1.247 in |
Cover End RPM [Max | N/A |
Controlled Flow Rate | N/A |
Shaft End Pressure [Max | N/A |
Pilot Type | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
Shaft Length | 4525VQ42A21-11AA20-LH |
Model No. | 3000 |
Displacement Cover End (cu in/revolution) | 2500 |
Shaft Type | 31.5 |
Seal Material | 63 |
Shaft Seal Type | w/o Integral Valves |
Integral Valve Configuration | Outlet 135° CCW from Inlet |
Relief Valve Setting | Outlet Opposite Inlet |
GPM @ 1,800 rpm, Shaft End | 1 in Flange |
GPM @ 1,800 rpm, Cover End | 1 1/2 in Flange |
Cover End Flow @ RPM | 4.12 |
Pressure Port Size, Shaft End | 8.46 |