1.75 Inch | 44.45 Millimeter x 2.125 Inch | 53.975 Millimeter x 1 Inch | 25.4 Millimeter IKO YB2816 Needle Non Thrust Roller Bearings
How do I place 1.75 Inch | 44.45 Millimeter x 2.125 Inch | 53.975 Millimeter x 1 Inch | 25.4 Millimeter an EMERGENCY order for a 1.75 Inch | 44.45 Millimeter x 2.125 Inch | 53.975 Millimeter x 1 Inch | 25.4 Millimeter IKO YB2816 Needle Non Thrust Roller Bearings that I want Bearing Rolamentos do Brasil Ltda. to pick up at a our store?
What is YB2816 bearing interchange?
Brand Name: | IKO |
Model Number: | YB2816 |
Mounting: | 76.0 LB |
Minor Diameter [Min: | Flange Mount |
Max. RPM [Max: | Right Hand (CW) |
Cover End RPM [Max: | 3525VQ38A17-86DC20 |
Shaft Type: | 3 |
Manufacturer Part No.: | Flange |
Major Diameter [Max: | 5/16 in |
Shaft Seal Type: | Standard Pilot |
Product Details
Mounting | 76.0 LB |
Minor Diameter [Min | Flange Mount |
Max. RPM [Max | Right Hand (CW) |
Cover End RPM [Max | 3525VQ38A17-86DC20 |
Shaft Type | 3 |
Manufacturer Part No. | Flange |
Major Diameter [Max | 5/16 in |
Shaft Seal Type | Standard Pilot |
Minor Diameter [Max | 1.375 in |
Pressure Port Size, Cover End | Straight w/ Key |
Model No. | 3525VQ |
Shaft End RPM [Max | 3 in |
Controlled Flow Rate | Double |
Integral Valve Configuration | Buna-N |
Cover End Pressure [Max | 2400 |
Port Orientation - Shaft End | N/A |
Rotation | SAE C, 2 Bolt |
Pump Series | Single Shaft Seal |
Weight | N/A |
Port Orientation - Cover End | 2500 |
Pilot Type | 2400 |
Port Size | N/A |
Pressure Port Size, Shaft End | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Dia. | N/A |
Minor Diameter | N/A |
Shaft Key | N/A |
Spline Description | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Port Type | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Major Diameter [Min | 3525VQ38A17-86DC20 |
Shaft End Pressure [Max | 3000 |
Shaft Length | 3000 |
Seal Material | 25.5 |
Mounting Flange | 57 |
Cover End Flow @ RPM | w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet 90° CW from Inlet |
Shaft End Flow @ RPM | 1 in Flange |
Displacement Shaft End (cu in/revolution) | 7.4 |
Relief Valve Setting | 3.4 |