IKO CRY22VUUR Cam Follower and Track Roller - Yoke Type
With over 3600 kgf dynamic load capacity: 10170 full-service stores, our IKO CRY22VUUR Cam Follower and Track Roller - Yoke Type inventory is extensive Bearing Rolamentos do Brasil Ltda. and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is CRY22VUUR bearing cross reference?
Brand Name: | IKO |
Model Number: | CRY22VUUR |
Minor Diameter [Min: | 76.0 LB |
Minor Diameter: | Flange Mount |
GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
Model No.: | 3525VQ30A21-11BB20 |
Manufacturer Part No.: | 3 |
Controlled Flow Rate: | Flange |
Major Diameter [Max: | N/A |
Integral Valve Configuration: | Standard Pilot |
Product Details
Minor Diameter [Min | 76.0 LB |
Minor Diameter | Flange Mount |
GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
Model No. | 3525VQ30A21-11BB20 |
Manufacturer Part No. | 3 |
Controlled Flow Rate | Flange |
Major Diameter [Max | N/A |
Integral Valve Configuration | Standard Pilot |
Mounting Flange | 1.25 in |
Pump Series | 14 Tooth Splined |
Shaft Length | 3525VQ |
Cover End Flow @ RPM | 1 15/16 in |
Weight | Buna-N |
Displacement Shaft End (cu in/revolution) | 2500 |
Shaft Type | 1.04 in |
Cover End Pressure [Max | SAE C, 2 Bolt |
Port Size | Single Shaft Seal |
Spline Description | 12/24 |
Shaft Dia. | 2500 |
Relief Valve Setting | 2500 |
Displacement Cover End (cu in/revolution) | N/A |
Major Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Key | 1.248 in |
Shaft End Pressure [Max | 1.247 in |
Max. RPM [Max | N/A |
Port Orientation - Shaft End | N/A |
Cover End RPM [Max | N/A |
Pressure Port Size, Cover End | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Minor Diameter [Max | 3525VQ30A21-11BB20 |
GPM @ 1,800 rpm, Cover End | 3000 |
Port Orientation - Cover End | 3000 |
Rotation | 31.5 |
Shaft End RPM [Max | 45 |
Seal Material | w/o Integral Valves |
Pilot Type | Outlet 45° CCW from Inlet |
Shaft Seal Type | Outlet 90° CCW from Inlet |
Pressure Port Size, Shaft End | 1 in Flange |
Mounting | 1 1/4 in Flange |
Port Type | 4.12 |
Shaft End Flow @ RPM | 5.96 |