0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM88 Needle Non Thrust Roller Bearings
Browse 0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM88 Needle Non Thrust Roller Bearings Categories in the Manufacturers Online 0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter Free. including IKO Bearing. Bearing Rolamentos do Brasil Ltda.
What is BAM88 bearing interchange?
Brand Name: | IKO |
Model Number: | BAM88 |
Minor Diameter: | 30.0 LB |
Shaft End Pressure [Max: | Flange Mount |
Mounting Flange: | Right Hand (CW) |
Port Orientation - Cover End: | V2010-1F9S3S-11CC12 |
Pressure Port Size, Shaft End: | 1.5 |
Shaft End Flow @ RPM: | Flange |
Shaft Dia.: | N/A |
Port Orientation - Shaft End: | N/A |
Product Details
Minor Diameter | 30.0 LB |
Shaft End Pressure [Max | Flange Mount |
Mounting Flange | Right Hand (CW) |
Port Orientation - Cover End | V2010-1F9S3S-11CC12 |
Pressure Port Size, Shaft End | 1.5 |
Shaft End Flow @ RPM | Flange |
Shaft Dia. | N/A |
Port Orientation - Shaft End | N/A |
Relief Valve Setting | 0.875 in |
Mounting | 13 Tooth Splined |
Pressure Port Size, Cover End | V2010 |
Spline Description | 1 5/16 in |
Pump Series | Double |
Shaft Seal Type | Buna-N |
Weight | 2800 |
Shaft Length | 0.728 in |
Max. RPM [Max | SAE B, 2 Bolt |
Port Size | Single Shaft Seal |
Shaft Key | 16/32 |
Cover End Flow @ RPM | 3000 |
Shaft End RPM [Max | 2800 |
Integral Valve Configuration | N/A |
Controlled Flow Rate | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
Minor Diameter [Max | 0.873 in |
Displacement Shaft End (cu in/revolution) | 1.8 |
Seal Material | 0.734 in |
GPM @ 1,800 rpm, Shaft End | 0.723 in |
Cover End RPM [Max | N/A |
Cover End Pressure [Max | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Port Type | V2010-1F9S3S-11CC12 |
Pilot Type | 2500 |
GPM @ 1,800 rpm, Cover End | 2500 |
Minor Diameter [Min | 4.5 |
Major Diameter [Max | 13.5 |
Rotation | N/A |
Model No. | Outlet 45° CW from Inlet |
Shaft Type | Outlet Inline w/Inlet |
Major Diameter [Min | 1/2 in SAE O-Ring |
Manufacturer Part No. | 3/4 in SAE O-Ring |
Displacement Cover End (cu in/revolution) | 0.6 |