| Rotation | 50.0 LB |
| Controlled Flow Rate | Flange Mount |
| Port Orientation - Cover End | Left Hand (CCW) |
| Mounting Flange | 35VQ25A-11D20-LH |
| Displacement Shaft End (cu in/revolution) | 2 |
| Minor Diameter [Min | Flange |
| Pressure Port Size, Shaft End | N/A |
| Seal Material | 20 |
| Cover End Pressure [Max | 25 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End | 11 |
| Max. RPM [Max | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End | 37.5 gpm @ 1800 rpm |
| Spline Description | 35VQ |
| Shaft End Pressure [Max | 1 15/16 in |
| Shaft Dia. | None |
| Pilot Type | 1 1/4 in Flange |
| Port Orientation - Shaft End | Buna-N |
| Shaft End Flow @ RPM | 2500 |
| Major Diameter [Min | 3000 psi |
| Model No. | 37 1/2 |
| Displacement Cover End (cu in/revolution) | A |
| Relief Valve Setting | SAE C, 2 Bolt |
| Pressure Port Size, Cover End | Single Shaft Seal |
| Port Type | 90° CW from Inlet |
| Integral Valve Configuration | 35VQ25A-11D20-LH |
| Port Size | 4.98 |
| Shaft Length | w/o Integral Valves |
