| Pressure Port Size, Shaft End | 45.0 LB |
| Max. RPM [Max | Flange Mount |
| Minor Diameter | Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End | 2520VQ21A5-11BB20 |
| Shaft Type | 2.5 |
| Spline Description | Flange |
| Integral Valve Configuration | N/A |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Mounting Flange | 13 Tooth Splined |
| Manufacturer Part No. | 2520VQ |
| Major Diameter [Min | 1 3/8 in |
| Pilot Type | Double |
| Controlled Flow Rate | Buna-N |
| Shaft Seal Type | 2500 |
| Cover End RPM [Max | 0.715 in |
| Shaft Length | SAE B, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Port Size | 16/32 |
| Port Orientation - Shaft End | 2700 |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Mounting | N/A |
| Relief Valve Setting | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Rotation | 0.873 in |
| Pressure Port Size, Cover End | 0.872 in |
| Seal Material | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft End RPM [Max | N/A |
| Weight | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 2520VQ21A5-11BB20 |
| Shaft Key | 3000 |
| Cover End Flow @ RPM | 3000 |
| Model No. | 7.5 |
| Major Diameter [Max | 31.5 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Port Type | Outlet 45° CCW from Inlet |
| Minor Diameter [Min | Outlet 90° CCW from Inlet |
| Cover End Pressure [Max | 3/4 in Flange |
| Shaft End Pressure [Max | 1 in Flange |
| Pump Series | 1.1 |
