INA TWA1423 Thrust Roller Bearing Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | T | d | H | B | R | r | a | C |
| TC1423 | INA | - | 22,225 | - | - | - | - | - | - |
| VKBA 1423 | SKF | - | - | - | - | - | - | - | - |
| RNU1423ZZA | NTN | - | 70,000 mm | - | 40,000 mm | - | - | - | 40,000 mm |
| NTA-1423 | KOYO | 1,984 mm | 22,23 mm | 37.31 | - | - | - | - | 13,43 kN |
| H414235/10 | Loyal | 41,275 mm | 63,5 mm | - | 41,275 mm | - | - | 10,9 mm | 252 kN |
| H414235/H414210 | Timken | 41,275 mm | 63,5 mm | - | 41,275 mm | 3,6 mm | 3,3 mm | - | 31,75 mm |
| H414235/H414210-B | Timken | - | 63,5 mm | - | 41,275 mm | 3,5 mm | - | - | 31,75 mm |
| H414236/H414210 | Timken | 41,275 mm | 63,5 mm | - | 41,275 mm | 7 mm | 3,3 mm | - | 31,75 mm |
| H414235-2 | TIMKEN | - | 2.5 Inch | 63.5 Millimeter | - | 1.625 Inch | 41.275 Millimeter | - | - | - | - |
| H414236-2 | TIMKEN | - | 2.5 Inch | 63.5 Millimeter | - | 1.625 Inch | 41.275 Millimeter | - | - | - | - |
| NP941423-K0956/Y32009X-K0928 | TIMKEN | - | - | - | - | - | - | - | - |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.69 Millimeter INA 3309-2Z Angular Contact Ball Bearings | Port Type:30.0 LB; Controlled Flow Rate:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Shaft End RPM [Max:V2010-1F7S5S-1CC12; GPM @ 1,800 rpm, Cover End:1 1/2; Manufacturer Part No.:Flange; Weight:3/16 in; Shaft Dia.:N/A; Shaft Length:0.875 in; Pilot Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| INA NATR6-X-PP Cam Follower and Track Roller - Yoke Type | Pilot Type:30.0 LB; Controlled Flow Rate:Flange Mount; Pump Series:Right Hand (CW); Shaft Key:V2010-1F7S5S-1CC12; Shaft Seal Type:1 1/2; Manufacturer Part No.:Flange; Shaft Length:3/16 in; Major Diameter [Max:N/A; Cover End RPM [Max:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| INA W3-5/8 Thrust Ball Bearing | Shaft End RPM [Max:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Seal Material:Right Hand (CW); Shaft Type:V2010-1F7S5S-1CC12; Cover End RPM [Max:1 1/2; Manufacturer Part No.:Flange; Shaft End Flow @ RPM:3/16 in; Relief Valve Setting:N/A; Shaft Key:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| 0.472 Inch | 12 Millimeter x 0.591 Inch | 15 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR12X15X16.5 Needle Non Thrust Roller Bearings | Minor Diameter [Max:30.0 LB; Spline Description:Flange Mount; Shaft Length:Right Hand (CW); Shaft End Flow @ RPM:V2010-1F7S5S-1CC12; Shaft Seal Type:1 1/2; Weight:Flange; Cover End Pressure [Max:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Dia.:0.875 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| INA 61902 2Z TNH Single Row Ball Bearings | Shaft Key:30.0 LB; Model No.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Shaft Dia.:V2010-1F7S5S-1CC12; Shaft End RPM [Max:1 1/2; Port Orientation - Shaft End:Flange; Major Diameter [Max:3/16 in; Max. RPM [Max:N/A; Displacement Cover End (cu in/revolution):0.875 in; Shaft Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| INA NATR25-X Cam Follower and Track Roller - Yoke Type | Minor Diameter [Min:30.0 LB; Port Orientation - Shaft End:Flange Mount; Rotation:Right Hand (CW); Minor Diameter:V2010-1F7S5S-1CC12; Minor Diameter [Max:1 1/2; Port Size:Flange; Cover End Pressure [Max:3/16 in; Model No.:N/A; Shaft Length:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
| 5.906 Inch | 150 Millimeter x 8.268 Inch | 210 Millimeter x 2.362 Inch | 60 Millimeter INA SL014930-C3 Cylindrical Roller Bearings | Shaft End Flow @ RPM:30.0 LB; Shaft Key:Flange Mount; Mounting Flange:Right Hand (CW); Controlled Flow Rate:V2010-1F7S5S-1CC12; Shaft End Pressure [Max:1 1/2; Spline Description:Flange; Pilot Type:3/16 in; Shaft Seal Type:N/A; Max. RPM [Max:0.875 in; Model No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S5S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.39; |
INA | Dalton Bearing
INA Bearing Company, a division of The Schaeffler Group. INA is dedicated on the production of extraordinary quality roller bearings, plain bearings and linear components. ... INA manufactures a line of Radial Ball Bearing Inserts that are highly versatile
INA/FAG Industrial Bearings from National Precision Bearing
National Precision is an authorized distributor for INA/FAG needle roller bearings, ball bearings, plain ball bearings, cylindrical bearings, and more
INA Bearings | E.B. Atmus Co., Inc
E. B. Atmus Co. is a distributor for all INA Bearings products. Order INA Bearing products securely online from E. B. Atmus Co
INA metal-polymer composite plain bearings - Schaeffler
Schaeffler Group Industrial has brought a new metal-polymer composite plain bearing onto the market under its INA brand. It replaces the standard Permaglide®
INA Bearings - Authorized, Factory-Direct Distributor | AST
INA® bearing products are in-stock and available immediately from AST® Bearings, an authorized, factory-direct, stocking distributor of INA bearings
INA TWA1423 Thrust Roller Bearing Video