INA GRA010-NPP-B Insert Bearings Spherical OD Series Supply | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | G | D | h | B | C | W | O | P |
1010KL | Timken | 13,89 mm | 40 mm | - | 27,78 mm | 10,7 kN | - | - | - |
1010KLL | Timken | 13,89 mm | 40 mm | - | 27,78 mm | 10,7 kN | - | - | - |
1010KLLB | Timken | 13,89 mm | 40 mm | - | 27,78 mm | 10,7 kN | - | - | - |
1010KR | Timken | - | 40 mm | - | 27,78 mm | 10,7 kN | - | 16,56 mm | 14,27 mm |
1010KRR | Timken | - | 40 mm | - | 27,78 mm | 10,7 kN | - | 16,56 mm | 14,27 mm |
1010KRRB | Timken | - | 40 mm | - | 27,78 mm | 10,7 kN | - | 16,56 mm | 14,27 mm |
5010 | Ruville | - | - | - | - | - | - | - | - |
KB50100 | NBS | - | 75 mm | - | - | 3,9 kN | 2,65 mm | - | - |
KB50100-PP | NBS | - | 75 mm | - | - | 3,9 kN | 2,65 mm | - | - |
KB50100AJ | Loyal | - | 75 mm | 1 mm | 100 mm | 7,5 kN | 2,65 mm | - | - |
KB50100OP | Loyal | - | 75 mm | - | 100 mm | 6 kN | 2,65 mm | - | - |
0.472 Inch | 12 Millimeter x 0.591 Inch | 15 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR12X15X16.5 Needle Non Thrust Roller Bearings | Shaft End RPM [Max:N/A; Major Diameter [Min:N/A; Minor Diameter:Piston Pumps; Shaft Seal Type:PVH; Pressure Port Size, Shaft End:0.0 LB; Pilot Type:Right Hand (CW); Pump Series:Flange; Shaft Key:Variable Displacement Open Circuit; Shaft Length:#8 SAE O-Ring Port - Bottom (Top Plugged); Integral Valve Configuration:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA NATR6-X-PP Cam Follower and Track Roller - Yoke Type | Pressure Port Size, Shaft End:N/A; Shaft Dia.:N/A; Seal Material:Piston Pumps; Minor Diameter [Min:PVH; Relief Valve Setting:0.0 LB; Cover End Flow @ RPM:Right Hand (CW); GPM @ 1,800 rpm, Cover End:Flange; Minor Diameter [Max:Variable Displacement Open Circuit; Pressure Port Size, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); Major Diameter [Min:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA NATR25-X Cam Follower and Track Roller - Yoke Type | Shaft Dia.:N/A; Shaft Key:N/A; Manufacturer Part No.:Piston Pumps; Cover End RPM [Max:PVH; Mounting Flange:0.0 LB; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Shaft End Flow @ RPM:Flange; Port Orientation - Cover End:Variable Displacement Open Circuit; Controlled Flow Rate:#8 SAE O-Ring Port - Bottom (Top Plugged); Seal Material:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA TWA1423 Thrust Roller Bearing | Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Rotation:Piston Pumps; Minor Diameter [Min:PVH; Weight:0.0 LB; Port Orientation - Cover End:Right Hand (CW); Max. RPM [Max:Flange; Major Diameter [Max:Variable Displacement Open Circuit; Shaft End RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft End Flow @ RPM:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA W3-5/8 Thrust Ball Bearing | Shaft End RPM [Max:N/A; Manufacturer Part No.:N/A; Port Type:Piston Pumps; Pilot Type:PVH; Seal Material:0.0 LB; Cover End RPM [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):Flange; Pressure Port Size, Shaft End:Variable Displacement Open Circuit; Shaft Key:#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End Pressure [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.69 Millimeter INA 3309-2Z Angular Contact Ball Bearings | Cover End Pressure [Max:N/A; Seal Material:N/A; Displacement Cover End (cu in/revolution):Piston Pumps; Manufacturer Part No.:PVH; Major Diameter [Max:0.0 LB; Shaft End RPM [Max:Right Hand (CW); Pressure Port Size, Cover End:Flange; Shaft End Pressure [Max:Variable Displacement Open Circuit; Relief Valve Setting:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Dia.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA 61902 2Z TNH Single Row Ball Bearings | Shaft Type:N/A; Seal Material:N/A; Shaft End Pressure [Max:Piston Pumps; Displacement Shaft End (cu in/revolution):PVH; Shaft Key:0.0 LB; Pressure Port Size, Cover End:Right Hand (CW); Major Diameter [Min:Flange; Minor Diameter [Min:Variable Displacement Open Circuit; Shaft Seal Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Rotation:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
5.906 Inch | 150 Millimeter x 8.268 Inch | 210 Millimeter x 2.362 Inch | 60 Millimeter INA SL014930-C3 Cylindrical Roller Bearings | Port Orientation - Shaft End:N/A; Minor Diameter:N/A; Pressure Port Size, Shaft End:Piston Pumps; Spline Description:PVH; Shaft End Pressure [Max:0.0 LB; Port Type:Right Hand (CW); Minor Diameter [Max:Flange; Controlled Flow Rate:Variable Displacement Open Circuit; Shaft Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Seal Material:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:IC Pressure and Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Continuous Pressure [Max:3625; Pressure Compensator Setting:None; Maximum Displacement Adjustment:Adjustable Max Displacement (Set at Max); |
INA metal-polymer composite plain bearings - Schaeffler
Schaeffler Group Industrial has brought a new metal-polymer composite plain bearing onto the market under its INA brand. It replaces the standard Permaglide®
INA Bearings - Authorized, Factory-Direct Distributor | AST
INA® bearing products are in-stock and available immediately from AST® Bearings, an authorized, factory-direct, stocking distributor of INA bearings
INA | Dalton Bearing
INA Bearing Company, a division of The Schaeffler Group. INA is dedicated on the production of extraordinary quality roller bearings, plain bearings and linear components. ... INA manufactures a line of Radial Ball Bearing Inserts that are highly versatile
INA/FAG Industrial Bearings from National Precision Bearing
National Precision is an authorized distributor for INA/FAG needle roller bearings, ball bearings, plain ball bearings, cylindrical bearings, and more
INA Bearings | E.B. Atmus Co., Inc
E. B. Atmus Co. is a distributor for all INA Bearings products. Order INA Bearing products securely online from E. B. Atmus Co
INA GRA010-NPP-B Insert Bearings Spherical OD Video