INA 61852 Single Row Ball Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | B | C | C0 | Size | Noun | Width |
| 61852 | ISO | 260 mm | 320 mm | 28 mm | 28 mm | - | 260x320x28 | - | 28 |
| 61852-2RS | ZEN | 260 mm | 320 mm | 28 mm | 79,5 kN | 119 kN | 260x320x28 | - | 28 |
| 61852-MA | NKE | 260 mm | 320 mm | 28 mm | 102 kN | 146 kN | 260x320x28 | - | 28 |
| 61852-M | FAG BEARING | 10.236 Inch | 260 Millimeter | 12.598 Inch | 320 Millimeter | - | - | - | - | Bearing | - |
| 61852-M-C3 | FAG BEARING | 10.236 Inch | 260 Millimeter | 12.598 Inch | 320 Millimeter | - | - | - | - | Bearing | - |
| 61852 M | CONSOLIDATED BEARING | 10.236 Inch | 260 Millimeter | 12.598 Inch | 320 Millimeter | - | - | - | - | Bearing | - |
| 61852 M C/3 | CONSOLIDATED BEARING | 10.236 Inch | 260 Millimeter | 12.598 Inch | 320 Millimeter | - | - | - | - | Bearing | - |
| 0.472 Inch | 12 Millimeter x 0.591 Inch | 15 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR12X15X16.5 Needle Non Thrust Roller Bearings | Pump Series:45.0 LB; Major Diameter [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Major Diameter [Min:2520VQ21E11-11DD20; Minor Diameter:2 1/2; Mounting Flange:Flange; Controlled Flow Rate:N/A; Integral Valve Configuration:Standard Pilot; Seal Material:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| INA TWA1423 Thrust Roller Bearing | Port Type:45.0 LB; Major Diameter [Max:Flange Mount; Shaft Seal Type:Right Hand (CW); Pump Series:2520VQ21E11-11DD20; Relief Valve Setting:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Shaft Length:N/A; Integral Valve Configuration:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.69 Millimeter INA 3309-2Z Angular Contact Ball Bearings | Integral Valve Configuration:45.0 LB; Shaft Seal Type:Flange Mount; Major Diameter [Min:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ21E11-11DD20; Model No.:2 1/2; Port Type:Flange; Relief Valve Setting:N/A; Spline Description:Standard Pilot; Max. RPM [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 5.906 Inch | 150 Millimeter x 8.268 Inch | 210 Millimeter x 2.362 Inch | 60 Millimeter INA SL014930-C3 Cylindrical Roller Bearings | Shaft End Pressure [Max:45.0 LB; Model No.:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Type:2520VQ21E11-11DD20; Shaft End RPM [Max:2 1/2; Shaft Length:Flange; Port Orientation - Shaft End:N/A; Pilot Type:Standard Pilot; Minor Diameter [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| INA NATR25-X Cam Follower and Track Roller - Yoke Type | Pressure Port Size, Shaft End:45.0 LB; Rotation:Flange Mount; Controlled Flow Rate:Right Hand (CW); Mounting:2520VQ21E11-11DD20; Port Size:2 1/2; Spline Description:Flange; Seal Material:N/A; Shaft Length:Standard Pilot; Model No.:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| INA NATR6-X-PP Cam Follower and Track Roller - Yoke Type | Manufacturer Part No.:45.0 LB; Port Type:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ21E11-11DD20; GPM @ 1,800 rpm, Cover End:2 1/2; Port Orientation - Cover End:Flange; Cover End Flow @ RPM:N/A; Major Diameter [Max:Standard Pilot; Shaft Length:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| INA W3-5/8 Thrust Ball Bearing | Model No.:45.0 LB; Cover End Pressure [Max:Flange Mount; Port Size:Right Hand (CW); Relief Valve Setting:2520VQ21E11-11DD20; Shaft Length:2 1/2; Mounting Flange:Flange; Spline Description:N/A; Rotation:Standard Pilot; Weight:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| INA 61902 2Z TNH Single Row Ball Bearings | Pressure Port Size, Shaft End:45.0 LB; Mounting:Flange Mount; Controlled Flow Rate:Right Hand (CW); Pilot Type:2520VQ21E11-11DD20; Seal Material:2 1/2; Shaft Key:Flange; Shaft Type:N/A; Minor Diameter:Standard Pilot; Shaft Seal Type:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
INA | Dalton Bearing
INA Bearing Company, a division of The Schaeffler Group. INA is dedicated on the production of extraordinary quality roller bearings, plain bearings and linear components. ... INA manufactures a line of Radial Ball Bearing Inserts that are highly versatile
INA Bearings | E.B. Atmus Co., Inc
E. B. Atmus Co. is a distributor for all INA Bearings products. Order INA Bearing products securely online from E. B. Atmus Co
INA Bearings - Authorized, Factory-Direct Distributor | AST
INA® bearing products are in-stock and available immediately from AST® Bearings, an authorized, factory-direct, stocking distributor of INA bearings
INA metal-polymer composite plain bearings - Schaeffler
Schaeffler Group Industrial has brought a new metal-polymer composite plain bearing onto the market under its INA brand. It replaces the standard Permaglide®
INA/FAG Industrial Bearings from National Precision Bearing
National Precision is an authorized distributor for INA/FAG needle roller bearings, ball bearings, plain ball bearings, cylindrical bearings, and more
INA 61852 Single Row Ball Bearings Video