INA ZL5206-DRS Cam Follower and Track Roller - Stud Type Series Supply | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | b | D | B | C | a | Da | ra |
SF5206 | NTN | 260,000 mm | - | 369,500 mm | 46,000 mm | 46,000 mm | - | - | - |
S5206 | ZEN | 30 mm | - | 62 mm | 23,8 mm | 25,6 kN | - | - | - |
S5206-2RS | ZEN | 30 mm | - | 62 mm | 23,8 mm | 25,6 kN | - | - | - |
5206 | CYSD | 30 mm | - | 62 mm | 23,8 mm | 29,7 kN | - | - | - |
5206 2RS | CYSD | 30 mm | - | 62 mm | 23,8 mm | 25,4 kN | - | - | - |
5206-2NS | NACHI | 30 mm | - | 62 mm | 23.8 mm | 25,9 kN | - | 56 mm | 1 mm |
5206-2RS | FBJ | 30 mm | - | 62 mm | 23,812 mm | 29,7 kN | - | - | - |
5206-2RS C3 | PFI | 30 mm | - | 62 mm | 23,8 mm | - | - | - | - |
5206A | NACHI | 30 mm | - | 62 mm | 23.8 mm | 28,6 kN | - | - | 1 mm |
5206A-2NS | NACHI | 30 mm | - | 62 mm | 23.8 mm | 24,4 kN | - | 56 mm | 1 mm |
5206AN | NACHI | 30 mm | 1.9 mm | 62 mm | 23.8 mm | 28,6 kN | 3.28 mm | 56 mm | 1 mm |
INA NATR6-X-PP Cam Follower and Track Roller - Yoke Type | Pump Series:76.0 LB; Shaft Seal Type:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Spline Description:3525VQ30A21-11DC20-LH; Rotation:3; Pressure Port Size, Cover End:Flange; Weight:N/A; Minor Diameter [Min:Standard Pilot; Port Size:1.25 in; Seal Material:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
INA 61902 2Z TNH Single Row Ball Bearings | Shaft End Pressure [Max:76.0 LB; Port Orientation - Shaft End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft Type:3525VQ30A21-11DC20-LH; Shaft End Flow @ RPM:3; Pilot Type:Flange; Weight:N/A; Shaft Length:Standard Pilot; Mounting:1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
5.906 Inch | 150 Millimeter x 8.268 Inch | 210 Millimeter x 2.362 Inch | 60 Millimeter INA SL014930-C3 Cylindrical Roller Bearings | Integral Valve Configuration:76.0 LB; Major Diameter [Max:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Major Diameter [Min:3525VQ30A21-11DC20-LH; Shaft Key:3; Pilot Type:Flange; Controlled Flow Rate:N/A; Model No.:Standard Pilot; Minor Diameter [Min:1.25 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.69 Millimeter INA 3309-2Z Angular Contact Ball Bearings | Controlled Flow Rate:76.0 LB; Manufacturer Part No.:Flange Mount; Shaft Key:Left Hand (CCW); Model No.:3525VQ30A21-11DC20-LH; Cover End RPM [Max:3; Shaft End Flow @ RPM:Flange; Cover End Pressure [Max:N/A; Cover End Flow @ RPM:Standard Pilot; Shaft Type:1.25 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
INA TWA1423 Thrust Roller Bearing | Port Size:76.0 LB; Shaft Seal Type:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ30A21-11DC20-LH; Mounting Flange:3; Mounting:Flange; Pilot Type:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
INA NATR25-X Cam Follower and Track Roller - Yoke Type | Displacement Shaft End (cu in/revolution):76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Minor Diameter:3525VQ30A21-11DC20-LH; Minor Diameter [Max:3; GPM @ 1,800 rpm, Cover End:Flange; Port Orientation - Cover End:N/A; Pilot Type:Standard Pilot; Rotation:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
0.472 Inch | 12 Millimeter x 0.591 Inch | 15 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR12X15X16.5 Needle Non Thrust Roller Bearings | Shaft Length:76.0 LB; Weight:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Model No.:3525VQ30A21-11DC20-LH; Shaft End Flow @ RPM:3; Pilot Type:Flange; Cover End Pressure [Max:N/A; Shaft Key:Standard Pilot; Port Type:1.25 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
INA W3-5/8 Thrust Ball Bearing | Pressure Port Size, Shaft End:76.0 LB; Shaft Type:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Pump Series:3525VQ30A21-11DC20-LH; Cover End RPM [Max:3; Seal Material:Flange; Model No.:N/A; Pressure Port Size, Cover End:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11DC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):6; |
INA Bearings - Authorized, Factory-Direct Distributor | AST
INA® bearing products are in-stock and available immediately from AST® Bearings, an authorized, factory-direct, stocking distributor of INA bearings
INA | Dalton Bearing
INA Bearing Company, a division of The Schaeffler Group. INA is dedicated on the production of extraordinary quality roller bearings, plain bearings and linear components. ... INA manufactures a line of Radial Ball Bearing Inserts that are highly versatile
INA/FAG Industrial Bearings from National Precision Bearing
National Precision is an authorized distributor for INA/FAG needle roller bearings, ball bearings, plain ball bearings, cylindrical bearings, and more
INA Bearings | E.B. Atmus Co., Inc
E. B. Atmus Co. is a distributor for all INA Bearings products. Order INA Bearing products securely online from E. B. Atmus Co
INA metal-polymer composite plain bearings - Schaeffler
Schaeffler Group Industrial has brought a new metal-polymer composite plain bearing onto the market under its INA brand. It replaces the standard Permaglide®
INA ZL5206-DRS Cam Follower and Track Roller - Stud Type Video