INA LR5204-2HRS-TVH Cam Follower and Track Roller - Yoke Type Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | b | D | B | C | a | Da | ra |
| 4R15204 | NTN | 760,000 mm | - | 1030,000 mm | 750,000 mm | 750,000 mm | - | - | - |
| S5204 | ZEN | 20 mm | - | 47 mm | 20 mm | 19,6 kN | - | - | - |
| S5204-2RS | ZEN | 20 mm | - | 47 mm | 20 mm | 19,6 kN | - | - | - |
| 5204 | CYSD | 20 mm | - | 47 mm | 20,6 mm | 19,7 kN | - | - | - |
| 5204 2RS | CYSD | 20 mm | - | 47 mm | 20,6 mm | 16 kN | - | - | - |
| 5204-2NS | NACHI | 20 mm | - | 47 mm | 20.6 mm | 20 kN | - | 41 mm | 1 mm |
| 5204-2RS | FBJ | 20 mm | - | 47 mm | 20,638 mm | 19,7 kN | - | - | - |
| 5204-2RS C3 | PFI | 20 mm | - | 47 mm | 20,6 mm | - | - | - | - |
| 5204A | NACHI | 20 mm | - | 47 mm | 20.6 mm | 19 kN | - | - | 1 mm |
| 5204A-2NS | NACHI | 20 mm | - | 47 mm | 20.6 mm | 19 kN | - | 41 mm | 1 mm |
| 5204AN | NACHI | 20 mm | 1.35 mm | 47 mm | 20.6 mm | 19 kN | 2.46 mm | 41 mm | 1 mm |
| INA 61902 2Z TNH Single Row Ball Bearings | Shaft End Flow @ RPM:30.0 LB; Port Type:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Minor Diameter [Min:V2010-1F11S6S-11CC12LH; GPM @ 1,800 rpm, Cover End:1 1/2; Shaft End Pressure [Max:Flange; Shaft Type:N/A; Port Size:N/A; Shaft Seal Type:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| INA NATR25-X Cam Follower and Track Roller - Yoke Type | Model No.:30.0 LB; Port Orientation - Cover End:Flange Mount; Major Diameter [Min:Left Hand (CCW); Spline Description:V2010-1F11S6S-11CC12LH; Mounting:1 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft Dia.:N/A; Cover End Pressure [Max:N/A; Weight:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.69 Millimeter INA 3309-2Z Angular Contact Ball Bearings | Max. RPM [Max:30.0 LB; Cover End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Mounting:V2010-1F11S6S-11CC12LH; Port Type:1 1/2; Shaft Type:Flange; Relief Valve Setting:N/A; Shaft Seal Type:N/A; Seal Material:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| INA NATR6-X-PP Cam Follower and Track Roller - Yoke Type | Rotation:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Minor Diameter:Left Hand (CCW); Pressure Port Size, Cover End:V2010-1F11S6S-11CC12LH; Model No.:1 1/2; Shaft Length:Flange; Shaft End Pressure [Max:N/A; Cover End Pressure [Max:N/A; Mounting:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| 0.472 Inch | 12 Millimeter x 0.591 Inch | 15 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR12X15X16.5 Needle Non Thrust Roller Bearings | Minor Diameter [Max:30.0 LB; Mounting Flange:Flange Mount; Major Diameter [Max:Left Hand (CCW); Port Orientation - Shaft End:V2010-1F11S6S-11CC12LH; Major Diameter [Min:1 1/2; Cover End RPM [Max:Flange; Rotation:N/A; Pressure Port Size, Cover End:N/A; Displacement Cover End (cu in/revolution):0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| INA W3-5/8 Thrust Ball Bearing | Shaft Dia.:30.0 LB; Cover End RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Port Type:V2010-1F11S6S-11CC12LH; Minor Diameter [Max:1 1/2; Port Orientation - Shaft End:Flange; Weight:N/A; Controlled Flow Rate:N/A; Cover End Pressure [Max:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| 5.906 Inch | 150 Millimeter x 8.268 Inch | 210 Millimeter x 2.362 Inch | 60 Millimeter INA SL014930-C3 Cylindrical Roller Bearings | Mounting Flange:30.0 LB; Minor Diameter [Max:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Shaft End RPM [Max:V2010-1F11S6S-11CC12LH; Cover End RPM [Max:1 1/2; Shaft Length:Flange; Shaft Key:N/A; Shaft Type:N/A; Seal Material:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
| INA TWA1423 Thrust Roller Bearing | Port Type:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Cover End Pressure [Max:V2010-1F11S6S-11CC12LH; Manufacturer Part No.:1 1/2; Mounting Flange:Flange; Controlled Flow Rate:N/A; Pump Series:N/A; Shaft Seal Type:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
INA metal-polymer composite plain bearings - Schaeffler
Schaeffler Group Industrial has brought a new metal-polymer composite plain bearing onto the market under its INA brand. It replaces the standard Permaglide®
INA Bearings - Authorized, Factory-Direct Distributor | AST
INA® bearing products are in-stock and available immediately from AST® Bearings, an authorized, factory-direct, stocking distributor of INA bearings
INA | Dalton Bearing
INA Bearing Company, a division of The Schaeffler Group. INA is dedicated on the production of extraordinary quality roller bearings, plain bearings and linear components. ... INA manufactures a line of Radial Ball Bearing Inserts that are highly versatile
INA/FAG Industrial Bearings from National Precision Bearing
National Precision is an authorized distributor for INA/FAG needle roller bearings, ball bearings, plain ball bearings, cylindrical bearings, and more
INA Bearings | E.B. Atmus Co., Inc
E. B. Atmus Co. is a distributor for all INA Bearings products. Order INA Bearing products securely online from E. B. Atmus Co
INA LR5204-2HRS-TVH Cam Follower and Track Roller - Yoke Type Video