1.102 Inch | 28 Millimeter x 1.299 Inch | 33 Millimeter x 0.512 Inch | 13 Millimeter IKO KT283313 Needle Non Thrust Roller Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | B | C | Fw | B_ | Z_ | C0 |
| FWF-283313 | NSK | 28 | 33 | - | 13.7 | 28 mm | 13 | 22 | 20.4 |
| KT 283313 | IKO | 28 | 33 | - | 13,8 kN | 28 mm | - | - | 20,7 kN |
| KT283313 | IKO | 1.102 Inch | 28 Millimeter | 1.299 Inch | 33 Millimeter | 0.512 Inch | 13 Millimeter | - | - | - | - | - |
| IKO GS80115 Thrust Roller Bearing | Pump Series:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Integral Valve Configuration:Right Hand (CW); Spline Description:V2010-1F8S3S-11CA12; Cover End Flow @ RPM:1.5; Port Orientation - Shaft End:Flange; Shaft End RPM [Max:N/A; Mounting:N/A; Pressure Port Size, Shaft End:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Integral Valve Configuration:30.0 LB; Cover End RPM [Max:Flange Mount; Spline Description:Right Hand (CW); Port Type:V2010-1F8S3S-11CA12; Shaft End Pressure [Max:1.5; Pressure Port Size, Shaft End:Flange; Cover End Pressure [Max:N/A; Seal Material:N/A; Minor Diameter [Max:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Pilot Type:30.0 LB; Port Orientation - Cover End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Spline Description:V2010-1F8S3S-11CA12; Major Diameter [Min:1.5; Relief Valve Setting:Flange; Mounting:N/A; Minor Diameter:N/A; Controlled Flow Rate:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Displacement Shaft End (cu in/revolution):30.0 LB; Major Diameter [Max:Flange Mount; Rotation:Right Hand (CW); Shaft End Pressure [Max:V2010-1F8S3S-11CA12; Mounting Flange:1.5; Minor Diameter [Max:Flange; Pilot Type:N/A; Shaft Seal Type:N/A; Cover End Flow @ RPM:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Shaft Key:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Controlled Flow Rate:V2010-1F8S3S-11CA12; Pilot Type:1.5; Shaft End Flow @ RPM:Flange; Major Diameter [Min:N/A; Weight:N/A; Pressure Port Size, Shaft End:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Port Type:30.0 LB; Max. RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Rotation:V2010-1F8S3S-11CA12; Major Diameter [Min:1.5; Weight:Flange; Minor Diameter [Max:N/A; Shaft Length:N/A; Minor Diameter [Min:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | Max. RPM [Max:30.0 LB; Major Diameter [Min:Flange Mount; Shaft Type:Right Hand (CW); Cover End RPM [Max:V2010-1F8S3S-11CA12; Mounting Flange:1.5; Shaft Length:Flange; Cover End Pressure [Max:N/A; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Shaft Dia.:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Pump Series:V2010-1F8S3S-11CA12; Integral Valve Configuration:1.5; Minor Diameter [Min:Flange; Port Type:N/A; Weight:N/A; Spline Description:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11CA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.6; |
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
1.102 Inch | 28 Millimeter x 1.299 Inch | 33 Millimeter x 0.512 Inch | 13 Millimeter IKO KT283313 Needle Non Thrust Roller Bearings Video