IKO CR14V Cam Follower and Track Roller - Stud Type Series Supply | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | Noun | Weight | UNSPSC | Profile | Inventory | Enclosure | Hex Socket | Thread Size |
CR14VBUU | IKO | Bearing | 0.047 | 31171530 | Stud Type | 20.0 | Sealed | Yes | 3/8-24 |
CR14V | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Metal Shielded | No | 3/8-24 |
CR14VB | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Metal Shielded | Yes | 3/8-24 |
CR14VBR | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Metal Shielded | Yes | 3/8-24 |
CR14VBUUR | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Sealed | Yes | 3/8-24 |
CR14VUU | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Sealed | No | 3/8-24 |
CR14VR | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Metal Shielded | No | 3/8-24 |
CR14VUUR | IKO | Bearing | 0.047 | 31171530 | Stud Type | 0.0 | Sealed | No | 3/8-24 |
1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Weight:30.0 LB; Integral Valve Configuration:Flange Mount; Minor Diameter [Max:Right Hand (CW); Minor Diameter:V2010-1F11S5S-1BB12; Displacement Shaft End (cu in/revolution):1 1/2; Port Orientation - Shaft End:Flange; Pump Series:3/16 in; Minor Diameter [Min:N/A; Pilot Type:0.875 in; Port Size:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
IKO PHSA5 Spherical Plain Bearings - Rod Ends | Max. RPM [Max:30.0 LB; Shaft End RPM [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Manufacturer Part No.:V2010-1F11S5S-1BB12; GPM @ 1,800 rpm, Shaft End:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Shaft End Flow @ RPM:3/16 in; Port Orientation - Shaft End:N/A; Port Orientation - Cover End:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Minor Diameter [Max:30.0 LB; Port Size:Flange Mount; Manufacturer Part No.:Right Hand (CW); Max. RPM [Max:V2010-1F11S5S-1BB12; Shaft Dia.:1 1/2; Pilot Type:Flange; Rotation:3/16 in; Pump Series:N/A; Relief Valve Setting:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Relief Valve Setting:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Weight:Right Hand (CW); Cover End RPM [Max:V2010-1F11S5S-1BB12; Shaft Length:1 1/2; Pressure Port Size, Cover End:Flange; Cover End Pressure [Max:3/16 in; Shaft End Flow @ RPM:N/A; Shaft Type:0.875 in; Mounting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
IKO CF6UU Cam Follower and Track Roller - Stud Type | Shaft Dia.:30.0 LB; Shaft Seal Type:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Pump Series:V2010-1F11S5S-1BB12; Mounting:1 1/2; Cover End RPM [Max:Flange; Mounting Flange:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Length:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Minor Diameter:30.0 LB; Spline Description:Flange Mount; Minor Diameter [Min:Right Hand (CW); Manufacturer Part No.:V2010-1F11S5S-1BB12; Weight:1 1/2; Port Type:Flange; Major Diameter [Max:3/16 in; Shaft Dia.:N/A; Shaft End Pressure [Max:0.875 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | GPM @ 1,800 rpm, Shaft End:30.0 LB; Minor Diameter [Max:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Manufacturer Part No.:V2010-1F11S5S-1BB12; Pump Series:1 1/2; Major Diameter [Min:Flange; Port Orientation - Shaft End:3/16 in; Max. RPM [Max:N/A; Shaft Type:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
IKO GS80115 Thrust Roller Bearing | Port Orientation - Shaft End:30.0 LB; Pressure Port Size, Shaft End:Flange Mount; Spline Description:Right Hand (CW); Pump Series:V2010-1F11S5S-1BB12; Port Type:1 1/2; Controlled Flow Rate:Flange; Cover End Flow @ RPM:3/16 in; Shaft Type:N/A; Integral Valve Configuration:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-1BB12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO CR14V Cam Follower and Track Roller - Stud Type Video