0.625 Inch | 15.875 Millimeter x 0.875 Inch | 22.225 Millimeter x 0.765 Inch | 19.431 Millimeter IKO IRB1012 Needle Non Thrust Roller Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | G | D | B | C | O | P | d | L |
| 1012KL | Timken | 17,06 mm | 47 mm | 34,13 mm | 14,3 kN | - | - | 19.05 mm | 3,97 mm |
| 1012KLL | Timken | 17,06 mm | 47 mm | 34,13 mm | 14,3 kN | - | - | 19.05 mm | 3,97 mm |
| 1012KLLB | Timken | 17,06 mm | 47 mm | 34,13 mm | 14,3 kN | - | - | 19.05 mm | 3,97 mm |
| 1012KR | Timken | - | 47 mm | 34,13 mm | 14,3 kN | 16,56 mm | 15,29 mm | 19.05 mm | 4 mm |
| 1012KRR | Timken | - | 47 mm | 34,13 mm | 14,3 kN | 16,56 mm | 15,29 mm | 19.05 mm | 4 mm |
| 1012KRRB | Timken | - | 47 mm | 34,13 mm | 14,3 kN | 16,56 mm | 15,29 mm | 19.05 mm | 4 mm |
| YB 1012 | IKO | - | 20,638 mm | - | 17,8 kN | - | - | 15,875 | - |
| Y1012 | KOYO | - | 20,638 mm | - | 15,1 kN | - | - | 15,875 | - |
| Y-1012 | NSK | - | 20,638 mm | - | 17 kN | - | - | 15,875 | - |
| STF725RV1012g | NSK | - | 1 000 mm | 700 mm | 19 000 kN | - | - | 725 mm | - |
| STF760RV1012g | NSK | - | 1 030 mm | 750 mm | 20 800 kN | - | - | 760 mm | - |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Rotation:30.0 LB; Major Diameter [Min:Flange Mount; Model No.:Right Hand (CW); Relief Valve Setting:V2010-1F7S7S-1DC12; Max. RPM [Max:1 1/2; Shaft End Flow @ RPM:Flange; Shaft End RPM [Max:3/16 in; Pump Series:N/A; Displacement Cover End (cu in/revolution):0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Pressure Port Size, Shaft End:30.0 LB; Pilot Type:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Mounting:V2010-1F7S7S-1DC12; Shaft Length:1 1/2; Port Orientation - Shaft End:Flange; Shaft Type:3/16 in; Rotation:N/A; Pump Series:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Port Orientation - Shaft End:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Major Diameter [Min:Right Hand (CW); Minor Diameter [Min:V2010-1F7S7S-1DC12; Weight:1 1/2; Shaft Key:Flange; Port Size:3/16 in; Displacement Cover End (cu in/revolution):N/A; Mounting Flange:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | Manufacturer Part No.:30.0 LB; Spline Description:Flange Mount; Minor Diameter:Right Hand (CW); Seal Material:V2010-1F7S7S-1DC12; Port Orientation - Cover End:1 1/2; Shaft Dia.:Flange; Shaft Key:3/16 in; Cover End RPM [Max:N/A; Shaft End RPM [Max:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | GPM @ 1,800 rpm, Cover End:30.0 LB; Weight:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Seal Type:V2010-1F7S7S-1DC12; Model No.:1 1/2; Shaft End RPM [Max:Flange; Seal Material:3/16 in; Mounting Flange:N/A; Major Diameter [Min:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Displacement Shaft End (cu in/revolution):30.0 LB; Rotation:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Minor Diameter [Min:V2010-1F7S7S-1DC12; Port Size:1 1/2; Manufacturer Part No.:Flange; Port Orientation - Shaft End:3/16 in; Major Diameter [Max:N/A; Shaft Seal Type:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Shaft End Pressure [Max:30.0 LB; Rotation:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Type:V2010-1F7S7S-1DC12; Shaft Seal Type:1 1/2; Port Type:Flange; Shaft Dia.:3/16 in; Spline Description:N/A; Port Orientation - Cover End:0.875 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
| IKO GS80115 Thrust Roller Bearing | Displacement Shaft End (cu in/revolution):30.0 LB; Major Diameter [Max:Flange Mount; Shaft Length:Right Hand (CW); Rotation:V2010-1F7S7S-1DC12; Relief Valve Setting:1 1/2; Integral Valve Configuration:Flange; Pressure Port Size, Shaft End:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Pump Series:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S7S-1DC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39; |
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
0.625 Inch | 15.875 Millimeter x 0.875 Inch | 22.225 Millimeter x 0.765 Inch | 19.431 Millimeter IKO IRB1012 Needle Non Thrust Roller Bearings Video