1 Inch | 25.4 Millimeter x 1.25 Inch | 31.75 Millimeter x 0.875 Inch | 22.225 Millimeter IKO BA1614ZOH Needle Non Thrust Roller Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | T | B | C | R | Size | Width |
| TRA161404 | KOYO | 80 mm | 142 mm | 38 mm | 39 mm | 34 mm | 4,0 mm | 80x142x38 | 38 |
| 1614 | CYSD | 9,525 mm | 28,575 mm | - | 9,525 mm | 5,11 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614-2RS | CYSD | 9,525 mm | 28,575 mm | - | 9,525 mm | 5,11 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614-2Z | ZEN | 9,525 mm | 28,575 mm | - | 9,525 mm | 1,78 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614-RS | CYSD | 9,525 mm | 28,575 mm | - | 9,525 mm | 5,11 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614-Z | CYSD | 9,525 mm | 28,575 mm | - | 9,525 mm | 5,11 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614-ZZ | CYSD | 9,525 mm | 28,575 mm | - | 9,525 mm | 5,11 kN | - | 9.525x28.575x9.525 | 9,525 |
| 1614ZZ | FBJ | 9,525 mm | 28,575 mm | - | 9,525 mm | 400 kN | - | 9.525x28.575x9.525 | 9,525 |
| T-EE161400/161850 | NTN | 355,6 mm | 469,9 mm | 60,325 mm | 55,562 mm | 38,1 mm | - | 355.6x469.9x60.325 | 60,325 |
| T-EE161400/161900 | NTN | 355,6 mm | 482,6 mm | 60,325 mm | 55,562 mm | 38,1 mm | - | 355.6x482.6x60.325 | 60,325 |
| T-EE161400/161901D+A | NTN | 355,6 mm | 482,6 mm | 133,35 mm | - | - | - | 355.6x482.6x133.35 | 133,35 |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | GPM @ 1,800 rpm, Cover End:45.0 LB; Shaft Length:Flange Mount; Relief Valve Setting:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQS12C12-297CC20; Port Size:2 1/2; Manufacturer Part No.:Flange; Cover End Pressure [Max:N/A; Mounting Flange:SAE J744 Pilot; Pressure Port Size, Cover End:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| IKO GS80115 Thrust Roller Bearing | Pressure Port Size, Shaft End:45.0 LB; Minor Diameter:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Rotation:2520VQS12C12-297CC20; Model No.:2 1/2; Pump Series:Flange; Port Type:N/A; Port Orientation - Cover End:SAE J744 Pilot; Major Diameter [Min:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Pressure Port Size, Cover End:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Major Diameter [Min:Right Hand (CW); Cover End Flow @ RPM:2520VQS12C12-297CC20; Spline Description:2 1/2; Minor Diameter [Min:Flange; Displacement Cover End (cu in/revolution):N/A; Relief Valve Setting:SAE J744 Pilot; Mounting:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Major Diameter [Min:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQS12C12-297CC20; Minor Diameter [Min:2 1/2; Mounting Flange:Flange; Spline Description:N/A; Shaft End Flow @ RPM:SAE J744 Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Pressure Port Size, Cover End:45.0 LB; Major Diameter [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Shaft Key:2520VQS12C12-297CC20; Shaft End Flow @ RPM:2 1/2; Integral Valve Configuration:Flange; Mounting:N/A; Minor Diameter:SAE J744 Pilot; Seal Material:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | Port Orientation - Shaft End:45.0 LB; Port Size:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQS12C12-297CC20; Model No.:2 1/2; Pump Series:Flange; Mounting:N/A; Minor Diameter [Min:SAE J744 Pilot; Controlled Flow Rate:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Pilot Type:45.0 LB; Port Type:Flange Mount; Mounting:Right Hand (CW); Port Orientation - Shaft End:2520VQS12C12-297CC20; Weight:2 1/2; Port Size:Flange; Pressure Port Size, Cover End:N/A; Seal Material:SAE J744 Pilot; Spline Description:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Major Diameter [Max:45.0 LB; Relief Valve Setting:Flange Mount; Mounting:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQS12C12-297CC20; Cover End RPM [Max:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Port Size:N/A; Pressure Port Size, Shaft End:SAE J744 Pilot; Weight:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 1/4 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.858 in; Major Diameter [Min:0.852 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQS12C12-297CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
1 Inch | 25.4 Millimeter x 1.25 Inch | 31.75 Millimeter x 0.875 Inch | 22.225 Millimeter IKO BA1614ZOH Needle Non Thrust Roller Bearings Video