IKO CF16V Cam Follower and Track Roller - Stud Type Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | Noun | UNSPSC | Weight | Profile | Inventory | Enclosure | Hex Socket | Thread Size |
| CF16VUUR | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Sealed | No | M16X1.5 |
| CF16V | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Metal Shielded | No | M16X1.5 |
| CF16VBUUR | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Sealed | Yes | M16X1.5 |
| CF16VR | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Metal Shielded | No | M16X1.5 |
| CF16VB | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Metal Shielded | Yes | M16X1.5 |
| CF16VBR | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Metal Shielded | Yes | M16X1.5 |
| CF16VBUU | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Sealed | Yes | M16X1.5 |
| CF16VUU | IKO | Bearing | 31171530 | 0.172 | Stud Type | 0.0 | Sealed | No | M16X1.5 |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Spline Description:76.0 LB; Manufacturer Part No.:Flange Mount; Major Diameter [Min:Right Hand (CW); Minor Diameter:3525VQ35A21-1BB20; Port Size:3; Controlled Flow Rate:Flange; Shaft End Pressure [Max:5/16 in; Pressure Port Size, Cover End:Standard Pilot; Mounting Flange:1.25 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Shaft End Pressure [Max:76.0 LB; Cover End RPM [Max:Flange Mount; Spline Description:Right Hand (CW); Max. RPM [Max:3525VQ35A21-1BB20; Minor Diameter [Min:3; GPM @ 1,800 rpm, Shaft End:Flange; Model No.:5/16 in; Mounting Flange:Standard Pilot; Controlled Flow Rate:1.25 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | GPM @ 1,800 rpm, Cover End:76.0 LB; Pilot Type:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Integral Valve Configuration:3525VQ35A21-1BB20; Max. RPM [Max:3; Shaft Key:Flange; Model No.:5/16 in; Shaft End Flow @ RPM:Standard Pilot; Pump Series:1.25 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Cover End Pressure [Max:76.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft End RPM [Max:3525VQ35A21-1BB20; Shaft End Pressure [Max:3; Shaft Length:Flange; Shaft Dia.:5/16 in; Port Orientation - Shaft End:Standard Pilot; Max. RPM [Max:1.25 in; Minor Diameter [Min:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Port Size:76.0 LB; Weight:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft End RPM [Max:3525VQ35A21-1BB20; Shaft Length:3; Model No.:Flange; Cover End RPM [Max:5/16 in; Controlled Flow Rate:Standard Pilot; Minor Diameter:1.25 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Spline Description:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Dia.:Right Hand (CW); Shaft End RPM [Max:3525VQ35A21-1BB20; Port Orientation - Shaft End:3; Shaft Seal Type:Flange; Shaft Key:5/16 in; Model No.:Standard Pilot; Weight:1.25 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| IKO GS80115 Thrust Roller Bearing | Minor Diameter:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Pump Series:Right Hand (CW); Port Orientation - Cover End:3525VQ35A21-1BB20; Pilot Type:3; Controlled Flow Rate:Flange; GPM @ 1,800 rpm, Cover End:5/16 in; Shaft Key:Standard Pilot; Rotation:1.25 in; Manufacturer Part No.:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Minor Diameter [Max:76.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft Key:Right Hand (CW); Model No.:3525VQ35A21-1BB20; GPM @ 1,800 rpm, Cover End:3; Integral Valve Configuration:Flange; Shaft Type:5/16 in; Rotation:Standard Pilot; Port Orientation - Shaft End:1.25 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88; |
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO CF16V Cam Follower and Track Roller - Stud Type Video