IKO CRH52VB Cam Follower and Track Roller - Stud Type Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | Noun | Weight | UNSPSC | Profile | Inventory | Enclosure | Hex Socket | Thread Size |
| CRH52VB | IKO | Bearing | 2.379 | 31171530 | Stud Type | 0.0 | Metal Shielded | Yes | 1-1/2-12 |
| CRH52VBUU | IKO | Bearing | 2.379 | 31171530 | Stud Type | 0.0 | Sealed | Yes | 1-1/2-12 |
| CRH52VBUUR | IKO | Bearing | 2.379 | 31171530 | Stud Type | 0.0 | Sealed | Yes | 1-1/2-12 |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Weight:30.0 LB; Cover End RPM [Max:Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Length:V2010-1F13S4S-11AA12LH; Port Type:1 1/2; Minor Diameter [Max:Flange; Shaft Type:N/A; Shaft Key:N/A; Seal Material:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Pressure Port Size, Shaft End:30.0 LB; Controlled Flow Rate:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Minor Diameter:V2010-1F13S4S-11AA12LH; Mounting Flange:1 1/2; Pilot Type:Flange; Pressure Port Size, Cover End:N/A; Model No.:N/A; Cover End Pressure [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Minor Diameter [Min:30.0 LB; Port Orientation - Cover End:Flange Mount; Spline Description:Left Hand (CCW); Model No.:V2010-1F13S4S-11AA12LH; Mounting Flange:1 1/2; Cover End RPM [Max:Flange; Cover End Pressure [Max:N/A; Major Diameter [Max:N/A; Rotation:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | Shaft Dia.:30.0 LB; Shaft Seal Type:Flange Mount; Shaft Key:Left Hand (CCW); Port Type:V2010-1F13S4S-11AA12LH; Mounting Flange:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Displacement Shaft End (cu in/revolution):N/A; Manufacturer Part No.:N/A; Port Orientation - Shaft End:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Shaft Key:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Seal Type:Left Hand (CCW); Minor Diameter [Min:V2010-1F13S4S-11AA12LH; Pump Series:1 1/2; Seal Material:Flange; Cover End Pressure [Max:N/A; Relief Valve Setting:N/A; Major Diameter [Max:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Shaft Seal Type:30.0 LB; Cover End RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Relief Valve Setting:V2010-1F13S4S-11AA12LH; Port Orientation - Shaft End:1 1/2; Cover End Pressure [Max:Flange; Shaft End Pressure [Max:N/A; Cover End Flow @ RPM:N/A; Minor Diameter [Min:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Weight:30.0 LB; Minor Diameter [Min:Flange Mount; Minor Diameter:Left Hand (CCW); Mounting Flange:V2010-1F13S4S-11AA12LH; Pressure Port Size, Shaft End:1 1/2; Seal Material:Flange; Shaft End Pressure [Max:N/A; Major Diameter [Max:N/A; Port Orientation - Cover End:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
| IKO GS80115 Thrust Roller Bearing | Integral Valve Configuration:30.0 LB; Port Orientation - Cover End:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Pump Series:V2010-1F13S4S-11AA12LH; Cover End RPM [Max:1 1/2; Minor Diameter [Min:Flange; Shaft Length:N/A; Pressure Port Size, Cover End:N/A; Minor Diameter:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59; |
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO CRH52VB Cam Follower and Track Roller - Stud Type Video