IKO CF10-1V Cam Follower and Track Roller - Stud Type Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | Noun | UNSPSC | Weight | Profile | Inventory | Enclosure | Hex Socket | Thread Size |
| CF10-1VBUURM | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Sealed | Yes | M10X1 |
| CF10-1VBUUR | IKO | Bearing | 31171530 | 0 | Stud Type | 0.0 | Sealed | Yes | M10X1.25 |
| CF10-1V | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Metal Shielded | No | M10X1.25 |
| CF10-1VBR | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Metal Shielded | Yes | M10X1.25 |
| CF10-1VBUU | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Sealed | Yes | M10X1.25 |
| CF10-1VB | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Metal Shielded | Yes | M10X1.25 |
| CF10-1VR | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Metal Shielded | No | M10X1.25 |
| CF10-1VRM | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Metal Shielded | No | M10X1 |
| CF10-1VUU | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Sealed | No | M10X1.25 |
| CF10-1VUUR | IKO | Bearing | 31171530 | 0.06 | Stud Type | 0.0 | Sealed | No | M10X1.25 |
| CF10-1VUURM | IKO | Bearing | 31171530 | 0 | Stud Type | 0.0 | Sealed | No | M10X1 |
| IKO GS80115 Thrust Roller Bearing | Port Type:75.0 LB; Relief Valve Setting:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Minor Diameter [Max:3520VQ30A8-11AA20LH; Integral Valve Configuration:3; Shaft Key:Flange; GPM @ 1,800 rpm, Cover End:N/A; Mounting Flange:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| IKO PHSA5 Spherical Plain Bearings - Rod Ends | Port Orientation - Shaft End:75.0 LB; Shaft Key:Flange Mount; Major Diameter [Min:Left Hand (CCW); Displacement Cover End (cu in/revolution):3520VQ30A8-11AA20LH; Port Orientation - Cover End:3; Mounting Flange:Flange; Port Size:N/A; Spline Description:Standard Pilot; Shaft Seal Type:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| 0.669 Inch | 17 Millimeter x 0.827 Inch | 21 Millimeter x 0.63 Inch | 16 Millimeter IKO LRT172116 Needle Non Thrust Roller Bearings | Shaft End RPM [Max:75.0 LB; Minor Diameter [Min:Flange Mount; Rotation:Left Hand (CCW); Major Diameter [Max:3520VQ30A8-11AA20LH; Mounting:3; Controlled Flow Rate:Flange; Model No.:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Seal Material:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| 0.709 Inch | 18 Millimeter x 1.024 Inch | 26 Millimeter x 0.512 Inch | 13 Millimeter IKO RNA49/14UU Needle Non Thrust Roller Bearings | Model No.:75.0 LB; Major Diameter [Max:Flange Mount; Minor Diameter:Left Hand (CCW); Mounting:3520VQ30A8-11AA20LH; Spline Description:3; Max. RPM [Max:Flange; Pressure Port Size, Shaft End:N/A; Cover End RPM [Max:Standard Pilot; Port Size:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| 1.875 Inch | 47.625 Millimeter x 2.438 Inch | 61.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BR303920UU Needle Non Thrust Roller Bearings | Mounting Flange:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Model No.:Left Hand (CCW); Cover End Pressure [Max:3520VQ30A8-11AA20LH; Cover End RPM [Max:3; Shaft End Pressure [Max:Flange; Port Orientation - Cover End:N/A; Major Diameter [Max:Standard Pilot; Minor Diameter [Max:1.25 in; Weight:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| IKO NAST45ZZR Cam Follower and Track Roller - Yoke Type | Major Diameter [Min:75.0 LB; Model No.:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Manufacturer Part No.:3520VQ30A8-11AA20LH; Shaft Key:3; Max. RPM [Max:Flange; Relief Valve Setting:N/A; Cover End Pressure [Max:Standard Pilot; Shaft Type:1.25 in; Pump Series:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| IKO CF6UU Cam Follower and Track Roller - Stud Type | Mounting:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Dia.:Left Hand (CCW); Integral Valve Configuration:3520VQ30A8-11AA20LH; Shaft End Pressure [Max:3; Controlled Flow Rate:Flange; Shaft Key:N/A; Spline Description:Standard Pilot; Port Size:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
| 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1 Inch | 25.4 Millimeter IKO LRB202416 Needle Non Thrust Roller Bearings | GPM @ 1,800 rpm, Cover End:75.0 LB; Spline Description:Flange Mount; Port Size:Left Hand (CCW); Seal Material:3520VQ30A8-11AA20LH; Displacement Cover End (cu in/revolution):3; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Key:N/A; Shaft Length:Standard Pilot; Minor Diameter [Max:1.25 in; Port Orientation - Shaft End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30A8-11AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):5.96; |
IKO Bearing factory is Nippon Thompson Co. Ltd. - Bearings
Items 1 - 20 of 312 - Nippon Thompson Co. Ltd. is a specialist in the manufacture and sale of needle roller bearings and linear motion products! Suppling all of IKO
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Bearings - Berliss Bearing
IKO was the first company in Japan to initiate technical developments on the Needle Roller Bearing. It is now a leading manufacturer with many remarkable
IKO, International Inc. | Linear Guides, Needle Roller Bearings
IKO manufactures linear guides, needle roller bearings and positioning stages for semiconductor, packaging, medical, machine tool and automation
IKO Nippon Thompson Europe B.V. | experts in MOTION
IKO Nippon Thompson is an expert in the design and manufacturing of linear motion guides, needle roller bearings and precision positioning tables and stages
IKO CF10-1V Cam Follower and Track Roller - Stud Type Video