FAG NU210-E-K-TVP2-C3 Cylindrical Roller Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | C | B | U | d | C0 | s1 | C1 |
| 120FSH210 | Timken | 210 mm | 70 mm | - | - | 120 mm | - | - | - |
| 100NNU68210 | KOYO | 680 mm | 3810 kN | 210 mm | - | 500 mm | - | - | - |
| YSPAG 210 | SKF | 90 mm | 22 mm | - | - | 50 mm | - | - | - |
| YSPAG 210-115 | SKF | 90 mm | 22 mm | - | - | 49.212 mm | - | - | - |
| YTL 1210 | IKO | 16 mm | 7,47 kN | - | - | 12 | 11,8 kN | - | - |
| ZY-1210 | NSK | 18 mm | 8,3 kN | - | - | 12 | - | - | 10,5 mm |
| 140FS210 | Timken | 210 mm | 70 mm | - | - | 140 mm | - | - | - |
| 140FSF210 | NSK | 210 mm | 920 kN | 90 mm | 180 mm | 140 mm | - | - | - |
| F-210416 | INA | 21 mm | 18,7 mm | - | - | 15 mm | - | - | - |
| 11210 | Loyal | 90 mm | 22,9 kN | - | - | 50 mm | 8,15 kN | - | - |
| YET210 | SKF | 90 mm | 35,1 kN | 30,2 mm | - | 50 mm | 23,2 kN | 32,7 mm | - |
| FAG NJ1018-M1-C3 Cylindrical Roller Bearings | Model No.:45.0 LB; Weight:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Pressure Port Size, Cover End:2520VQ14E14-11CC20-LH; Shaft Type:2.5; Major Diameter [Max:Flange; Displacement Cover End (cu in/revolution):N/A; Port Type:Standard Pilot; Shaft Length:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| 280 mm x 380 mm x 63,5 mm FAG 32956 Tapered Roller Bearing Assemblies | Shaft Length:45.0 LB; Controlled Flow Rate:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Port Type:2520VQ14E14-11CC20-LH; Pilot Type:2.5; Minor Diameter [Min:Flange; Displacement Cover End (cu in/revolution):N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Weight:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| 90 mm x 190 mm x 43 mm FAG 7318-B-JP Angular Contact Ball Bearings | Mounting:45.0 LB; Weight:Flange Mount; Mounting Flange:Left Hand (CCW); Max. RPM [Max:2520VQ14E14-11CC20-LH; Port Orientation - Shaft End:2.5; Rotation:Flange; Cover End RPM [Max:N/A; Port Size:Standard Pilot; Shaft End Pressure [Max:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| FAG 22217-E1A-K-M-C2 Spherical Roller Bearings | GPM @ 1,800 rpm, Cover End:45.0 LB; Spline Description:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Seal Material:2520VQ14E14-11CC20-LH; Pilot Type:2.5; Cover End Flow @ RPM:Flange; Max. RPM [Max:N/A; Weight:Standard Pilot; Shaft Length:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| FAG 7219-B-JP-UA Angular Contact Ball Bearings | Shaft Dia.:45.0 LB; Major Diameter [Min:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Pump Series:2520VQ14E14-11CC20-LH; Pilot Type:2.5; Seal Material:Flange; Displacement Cover End (cu in/revolution):N/A; Shaft Key:Standard Pilot; Port Size:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| 95 mm x 170 mm x 43 mm FAG 22219-E1-K Spherical Roller Bearings | Cover End Pressure [Max:45.0 LB; Pilot Type:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Displacement Cover End (cu in/revolution):2520VQ14E14-11CC20-LH; Model No.:2.5; Manufacturer Part No.:Flange; Minor Diameter:N/A; Spline Description:Standard Pilot; Minor Diameter [Max:0.875 in; Port Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| Timken 938 Bearing | Displacement Shaft End (cu in/revolution):45.0 LB; Shaft End Flow @ RPM:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Cover End RPM [Max:2520VQ14E14-11CC20-LH; Shaft Seal Type:2.5; Shaft Length:Flange; GPM @ 1,800 rpm, Cover End:N/A; Controlled Flow Rate:Standard Pilot; Max. RPM [Max:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
| 60 mm x 78 mm x 10 mm FAG 61812-2Z-Y Single Row Ball Bearings | Shaft Key:45.0 LB; Seal Material:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Weight:2520VQ14E14-11CC20-LH; Major Diameter [Min:2.5; Displacement Cover End (cu in/revolution):Flange; Minor Diameter:N/A; Mounting Flange:Standard Pilot; Pilot Type:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14E14-11CC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8; |
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG NU210-E-K-TVP2-C3 Cylindrical Roller Bearings Video