80 mm x 170 mm x 58 mm FAG 22316-E1 Spherical Roller Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | b | m | d | a | e | l | c | |
| 22316-E1 | FAG | - | - | 6,27 kg / Weight | 80 mm | - | 0,34 | - | - |
| 22316-E1-K | FAG | - | - | 6,1 kg / Weight | 80 mm | - | 0,34 | - | - |
| 22316-E1-K + AHX2316 | FAG | AHX2316 / Designation, withdrawal sleeve | 12 mm | 6,1 kg / Weight | 80 mm | 4 mm | 0,34 | 71 mm | - |
| 22316-E1-K + H2316 | FAG | H2316 / Adapter sleeve | - | 6,1 kg / Weight | 80 mm | - | 0,34 | 78 mm | 17 mm |
| 22316-E1-K-T41A | FAG | - | - | 6,1 kg / Weight | 80 mm | - | 0,34 | - | - |
| 22316-E1-K-T41A + AHX2316 | FAG | AHX2316 / Designation, withdrawal sleeve | 12 mm | 6,1 kg / Weight | 80 mm | 4 mm | 0,34 | 71 mm | - |
| 22316-E1-K-T41A + H2316 | FAG | H2316 / Adapter sleeve | - | 6,1 kg / Weight | 80 mm | - | 0,34 | 78 mm | 17 mm |
| 22316-E1-T41A | FAG | - | - | 6,27 kg / Weight | 80 mm | - | 0,34 | - | - |
| 22316-E1A-MA-C3-T41A | FAG BEARING | - | - | - | - | - | - | - | - |
| 22316-E1A-M-C3-T41A | FAG BEARING | - | - | - | - | - | - | - | - |
| 22316-E1-R15-30 | FAG BEARING | - | - | - | - | - | - | - | - |
| FAG 22217-E1A-K-M-C2 Spherical Roller Bearings | Pressure Port Size, Cover End:45.0 LB; Mounting Flange:Flange Mount; Max. RPM [Max:Right Hand (CW); Manufacturer Part No.:2520VQ14A14-11CC20; Port Orientation - Cover End:2 1/2; Weight:Flange; Major Diameter [Max:N/A; Shaft End Pressure [Max:Standard Pilot; Relief Valve Setting:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| FAG 7219-B-JP-UA Angular Contact Ball Bearings | Mounting:45.0 LB; Cover End Flow @ RPM:Flange Mount; Minor Diameter [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ14A14-11CC20; Shaft Key:2 1/2; Cover End RPM [Max:Flange; Shaft End Pressure [Max:N/A; Weight:Standard Pilot; Pilot Type:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 60 mm x 78 mm x 10 mm FAG 61812-2Z-Y Single Row Ball Bearings | Max. RPM [Max:45.0 LB; Shaft Dia.:Flange Mount; Major Diameter [Max:Right Hand (CW); Weight:2520VQ14A14-11CC20; Port Type:2 1/2; Model No.:Flange; Rotation:N/A; Integral Valve Configuration:Standard Pilot; Controlled Flow Rate:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| Timken 938 Bearing | Pump Series:45.0 LB; Model No.:Flange Mount; Spline Description:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQ14A14-11CC20; Cover End RPM [Max:2 1/2; Rotation:Flange; Integral Valve Configuration:N/A; Minor Diameter [Max:Standard Pilot; Major Diameter [Max:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 90 mm x 190 mm x 43 mm FAG 7318-B-JP Angular Contact Ball Bearings | Shaft End RPM [Max:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Pilot Type:Right Hand (CW); Port Type:2520VQ14A14-11CC20; Manufacturer Part No.:2 1/2; Minor Diameter:Flange; Minor Diameter [Min:N/A; Spline Description:Standard Pilot; Shaft Seal Type:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 95 mm x 170 mm x 43 mm FAG 22219-E1-K Spherical Roller Bearings | Cover End Pressure [Max:45.0 LB; Rotation:Flange Mount; Seal Material:Right Hand (CW); Model No.:2520VQ14A14-11CC20; Shaft End Pressure [Max:2 1/2; Cover End RPM [Max:Flange; Port Type:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Major Diameter [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 280 mm x 380 mm x 63,5 mm FAG 32956 Tapered Roller Bearing Assemblies | Shaft End RPM [Max:45.0 LB; Pressure Port Size, Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft Length:2520VQ14A14-11CC20; Minor Diameter:2 1/2; Relief Valve Setting:Flange; Cover End Pressure [Max:N/A; Mounting:Standard Pilot; Spline Description:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| FAG NJ1018-M1-C3 Cylindrical Roller Bearings | Cover End Pressure [Max:45.0 LB; Mounting Flange:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Spline Description:2520VQ14A14-11CC20; Displacement Cover End (cu in/revolution):2 1/2; Shaft Key:Flange; Model No.:N/A; Cover End RPM [Max:Standard Pilot; Max. RPM [Max:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
80 mm x 170 mm x 58 mm FAG 22316-E1 Spherical Roller Bearings Video