110 mm x 240 mm x 92,1 mm FAG 3322-M Angular Contact Ball Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | a | T | H | R | B | C | A | |
| VKBA 3322 | SKF | - | - | - | - | - | - | - | - |
| 3322 | Loyal | - | 117 mm | - | - | - | - | 292 kN | - |
| 3322 A | ISB | - | 142 mm | - | - | - | 92,1 mm | 285,2 kN | - |
| 3322 D | ISB | - | 217 mm | - | - | - | 92,1 mm | 307 kN | - |
| 3322-M | FAG | - | 171 mm | - | - | - | 92,1 mm | - | - |
| 3322A | SKF | - | 142 mm | - | - | - | 92,1 mm | 291 kN | - |
| BE263322ASYB1 | KOYO | - | - | - | - | - | 21,8 mm | - | - |
| 53322-MP | FAG | - | - | 67,2 mm | - | 140 mm | - | - | 3 / Factor min. load |
| 53322-MP + U322 | FAG | U322 / Designation, seating washer | - | 67,2 mm | - | 140 mm | - | 20,5 mm | 3 / Factor min. load |
| 53322-MP+U322 | NKE | - | - | - | 67,2 mm | 140 mm | - | 275 kN | 51 mm |
| 3322-M-C3 | FAG BEARING | - | - | - | - | - | 3.626 Inch | 92.1 Millimeter | - | - |
| 280 mm x 380 mm x 63,5 mm FAG 32956 Tapered Roller Bearing Assemblies | Displacement Cover End (cu in/revolution):45.0 LB; Cover End Pressure [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Shaft End Pressure [Max:2520VQ14C14-11DD20; Weight:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Mounting:N/A; Pressure Port Size, Shaft End:Standard Pilot; Rotation:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| FAG 22217-E1A-K-M-C2 Spherical Roller Bearings | Cover End RPM [Max:45.0 LB; Shaft End RPM [Max:Flange Mount; Manufacturer Part No.:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQ14C14-11DD20; Shaft Type:2 1/2; Shaft Dia.:Flange; Port Orientation - Cover End:N/A; Relief Valve Setting:Standard Pilot; Model No.:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| FAG NJ1018-M1-C3 Cylindrical Roller Bearings | Max. RPM [Max:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Port Size:Right Hand (CW); Pressure Port Size, Cover End:2520VQ14C14-11DD20; Pilot Type:2 1/2; Shaft End RPM [Max:Flange; Integral Valve Configuration:N/A; Shaft Key:Standard Pilot; Cover End RPM [Max:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 95 mm x 170 mm x 43 mm FAG 22219-E1-K Spherical Roller Bearings | Shaft Type:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Shaft Length:2520VQ14C14-11DD20; Port Type:2 1/2; Shaft End Flow @ RPM:Flange; Pressure Port Size, Cover End:N/A; Cover End Pressure [Max:Standard Pilot; Port Orientation - Shaft End:0.875 in; Pump Series:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 60 mm x 78 mm x 10 mm FAG 61812-2Z-Y Single Row Ball Bearings | Cover End Pressure [Max:45.0 LB; Mounting Flange:Flange Mount; Shaft Seal Type:Right Hand (CW); Relief Valve Setting:2520VQ14C14-11DD20; Manufacturer Part No.:2 1/2; Minor Diameter:Flange; Port Type:N/A; Weight:Standard Pilot; Major Diameter [Max:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| Timken 938 Bearing | Shaft Seal Type:45.0 LB; Port Size:Flange Mount; Max. RPM [Max:Right Hand (CW); Major Diameter [Max:2520VQ14C14-11DD20; Spline Description:2 1/2; Pump Series:Flange; Relief Valve Setting:N/A; Cover End Flow @ RPM:Standard Pilot; Port Orientation - Shaft End:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| 90 mm x 190 mm x 43 mm FAG 7318-B-JP Angular Contact Ball Bearings | Port Size:45.0 LB; Shaft End RPM [Max:Flange Mount; Weight:Right Hand (CW); Relief Valve Setting:2520VQ14C14-11DD20; Pressure Port Size, Shaft End:2 1/2; Port Orientation - Shaft End:Flange; Rotation:N/A; Minor Diameter [Min:Standard Pilot; Minor Diameter:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
| FAG 7219-B-JP-UA Angular Contact Ball Bearings | Seal Material:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter [Min:Right Hand (CW); Port Type:2520VQ14C14-11DD20; Shaft End Pressure [Max:2 1/2; Major Diameter [Min:Flange; Shaft Seal Type:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Cover End Pressure [Max:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14C14-11DD20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77; |
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
110 mm x 240 mm x 92,1 mm FAG 3322-M Angular Contact Ball Bearings Video