FAG 7018 E.T.P4 UL Precision Ball Bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | B | a | Size | Width | Ball - z | Mass bearing |
| S7018 ACB/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 25 | 1.18 kg |
| S7018 ACB/P4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 25 | 1.25 kg |
| S7018 ACD/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 20 | 1.02 kg |
| S7018 ACD/P4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 20 | 1.17 kg |
| S7018 ACE/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 28 | 1.16 kg |
| S7018 ACE/P4A | SKF | 90 mm | 140 mm | 24 mm | 39 mm | 140x90x24 | 24 | 28 | 1.25 kg |
| S7018 CB/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 27.5 mm | 140x90x24 | 24 | 25 | 1.18 kg |
| S7018 CB/P4A | SKF | 90 mm | 140 mm | 24 mm | 27.5 mm | 140x90x24 | 24 | 25 | 1.25 kg |
| S7018 CD/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 27.5 mm | 140x90x24 | 24 | 20 | 1.02 kg |
| S7018 CD/P4A | SKF | 90 mm | 140 mm | 24 mm | 27.5 mm | 140x90x24 | 24 | 20 | 1.17 kg |
| S7018 CE/HCP4A | SKF | 90 mm | 140 mm | 24 mm | 27.5 mm | 140x90x24 | 24 | 28 | 1.16 kg |
| Timken 938 Bearing | Port Type:35.0 LB; Shaft Seal Type:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Shaft Key:V2020-1F6S6S-11DD30L; GPM @ 1,800 rpm, Shaft End:2; Shaft End Flow @ RPM:Flange; Mounting Flange:N/A; Pressure Port Size, Cover End:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| 280 mm x 380 mm x 63,5 mm FAG 32956 Tapered Roller Bearing Assemblies | Major Diameter [Min:35.0 LB; Minor Diameter:Flange Mount; Mounting:Left Hand (CCW); Displacement Shaft End (cu in/revolution):V2020-1F6S6S-11DD30L; Major Diameter [Max:2; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Pilot Type:N/A; Port Size:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| FAG 7219-B-JP-UA Angular Contact Ball Bearings | Weight:35.0 LB; Seal Material:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Pilot Type:V2020-1F6S6S-11DD30L; Displacement Cover End (cu in/revolution):2; Cover End RPM [Max:Flange; Shaft Length:N/A; Pump Series:N/A; Port Size:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| 90 mm x 190 mm x 43 mm FAG 7318-B-JP Angular Contact Ball Bearings | Displacement Shaft End (cu in/revolution):35.0 LB; Manufacturer Part No.:Flange Mount; Rotation:Left Hand (CCW); Cover End Pressure [Max:V2020-1F6S6S-11DD30L; Spline Description:2; Relief Valve Setting:Flange; Port Orientation - Shaft End:N/A; Minor Diameter:N/A; Pilot Type:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| FAG NJ1018-M1-C3 Cylindrical Roller Bearings | Cover End Pressure [Max:35.0 LB; Minor Diameter [Max:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Mounting:V2020-1F6S6S-11DD30L; GPM @ 1,800 rpm, Cover End:2; Major Diameter [Max:Flange; Port Orientation - Shaft End:N/A; Port Size:N/A; Shaft End Flow @ RPM:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| 60 mm x 78 mm x 10 mm FAG 61812-2Z-Y Single Row Ball Bearings | Shaft End RPM [Max:35.0 LB; Port Size:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Shaft Length:V2020-1F6S6S-11DD30L; Major Diameter [Min:2; Shaft Key:Flange; Shaft End Pressure [Max:N/A; Mounting Flange:N/A; Cover End Flow @ RPM:0.875 in; Model No.:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| 95 mm x 170 mm x 43 mm FAG 22219-E1-K Spherical Roller Bearings | Minor Diameter [Max:35.0 LB; Seal Material:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Controlled Flow Rate:V2020-1F6S6S-11DD30L; Max. RPM [Max:2; Displacement Shaft End (cu in/revolution):Flange; Shaft End Flow @ RPM:N/A; Major Diameter [Max:N/A; Shaft Key:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
| FAG 22217-E1A-K-M-C2 Spherical Roller Bearings | Minor Diameter [Min:35.0 LB; Mounting Flange:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Shaft Type:V2020-1F6S6S-11DD30L; Cover End RPM [Max:2; Shaft Dia.:Flange; Model No.:N/A; Controlled Flow Rate:N/A; Port Orientation - Shaft End:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F6S6S-11DD30L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):1.2; |
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG 7018 E.T.P4 UL Precision Ball Bearings Video