20V 25V 35V 45V Eaton Vickers Hydraulic Pumps , Hydraulic Pump Unit
| Shaft End Pressure [Max: |
32.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Cover End Pressure [Max: |
Right Hand (CW) |
| Minor Diameter: |
12 gal/min @ 1200 rpm |
| Manufacturer Part No.: |
25VQ12A-11B20 |
| Controlled Flow Rate: |
1.5 |
| Shaft Dia.: |
Flange |
| Minor Diameter [Max: |
N/A |
| PDF |
|
Product Details
| Shaft End Pressure [Max |
32.0 LB |
| Relief Valve Setting |
Flange Mount |
| Cover End Pressure [Max |
Right Hand (CW) |
| Minor Diameter |
12 gal/min @ 1200 rpm |
| Manufacturer Part No. |
25VQ12A-11B20 |
| Controlled Flow Rate |
1.5 |
| Shaft Dia. |
Flange |
| Minor Diameter [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
20 |
| Pilot Type |
12 gpm @ 1200 rpm |
| Port Size |
11 |
| Shaft Length |
0.875 in |
| Shaft Seal Type |
13 Tooth Splined |
| Seal Material |
18 gpm @ 1800 rpm |
| Port Orientation - Cover End |
25VQ |
| Displacement Shaft End (cu in/revolution) |
1 3/8 in |
| GPM @ 1,800 rpm, Shaft End |
Single |
| Major Diameter [Max |
None |
| Integral Valve Configuration |
1 in Flange |
| Major Diameter [Min |
Buna-N |
| Shaft End RPM [Max |
2700 |
| Cover End RPM [Max |
3000 psi |
| Weight |
18 |
| Shaft Type |
A |
| Shaft End Flow @ RPM |
SAE B, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Max. RPM [Max |
90° CCW from Inlet |
| Pressure Port Size, Shaft End |
25VQ12A-11B20 |
| Pressure Port Size, Cover End |
2.5 |
| Port Type |
w/o Integral Valves |