1.575 Inch | 40 Millimeter x 2.677 Inch | 68 Millimeter x 0.591 Inch | 15 Millimeter NTN MLE7008HVUJ84S Precision Ball Bearings
Offer High Quality 4 Width (mm) Brand 1.575 Inch | 40 Millimeter x 2.677 Inch | 68 Millimeter x 0.591 Inch | 15 Millimeter NTN MLE7008HVUJ84S Precision Ball Bearings .Contact Us Online to Get Best Bearing Rolamentos do Brasil Ltda. Quote. 1.575 Inch | 40 Millimeter x 2.677 Inch | 68 Millimeter x 0.591 Inch | 15 Millimeter 135 mm D
What is MLE7008HVUJ84S bearing interchange？
| Brand Name: |
NTN |
| Model Number: |
MLE7008HVUJ84S |
| Minor Diameter: |
45.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Shaft Length: |
Left Hand (CCW) |
| Manufacturer Part No.: |
2520VQ21A8-11AA20LH |
| Mounting Flange: |
2 1/2 |
| Pressure Port Size, Cover End: |
Flange |
| Pressure Port Size, Shaft End: |
N/A |
| Weight: |
Standard Pilot |
Product Details
| Minor Diameter |
45.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Shaft Length |
Left Hand (CCW) |
| Manufacturer Part No. |
2520VQ21A8-11AA20LH |
| Mounting Flange |
2 1/2 |
| Pressure Port Size, Cover End |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Weight |
Standard Pilot |
| GPM @ 1,800 rpm, Cover End |
0.875 in |
| Rotation |
13 Tooth Splined |
| Cover End RPM [Max |
2520VQ |
| Port Orientation - Cover End |
1.375 in |
| Shaft End Pressure [Max |
Buna-N |
| Minor Diameter [Min |
2500 |
| Pilot Type |
0.715 in |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Seal Material |
2700 |
| Model No. |
2500 |
| Major Diameter [Min |
N/A |
| Pump Series |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Port Type |
0.873 in |
| Displacement Cover End (cu in/revolution) |
0.872 in |
| Major Diameter [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Shaft Type |
N/A |
| Controlled Flow Rate |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
2520VQ21A8-11AA20LH |
| Cover End Flow @ RPM |
3000 |
| Shaft End Flow @ RPM |
3000 |
| Shaft Dia. |
12 |
| Displacement Shaft End (cu in/revolution) |
31.5 |
| Relief Valve Setting |
w/o Integral Valves |
| Shaft Key |
Outlet 135° CCW from Inlet |
| Shaft Seal Type |
Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Shaft End |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Spline Description |
1.67 |
| Mounting |
4.12 |