0.787 Inch | 20 Millimeter x 1.654 Inch | 42 Millimeter x 0.472 Inch | 12 Millimeter NTN MLE7004HVUJ74S Precision Ball Bearings
With over 10170 full-service stores, our 0.787 Inch | 20 Millimeter x 1.654 Inch | 42 Millimeter x 0.472 Inch | 12 Millimeter NTN MLE7004HVUJ74S Precision Ball Bearings inventory is extensive and our parts are priced right. within Bearing Rolamentos do Brasil Ltda. 24 hours. This helps 0.787 Inch | 20 Millimeter x 1.654 Inch | 42 Millimeter x 0.472 Inch | 12 Millimeter you maximize your productivity by saving 111 kN Basic static load rating (C0) time and your hard-earned dollars.
What is MLE7004HVUJ74S bearing cross reference?
Brand Name: |
NTN |
Model Number: |
MLE7004HVUJ74S |
Shaft End Pressure [Max: |
N/A |
Shaft End Flow @ RPM: |
No Paint |
Major Diameter [Min: |
Piston Pumps |
Pressure Port Size, Cover End: |
PVH |
Controlled Flow Rate: |
0.0 LB |
Pump Series: |
Right Hand (CW) |
Seal Material: |
Flange |
Cover End Flow @ RPM: |
Variable Displacement Open Circuit |
Product Details
Shaft End Pressure [Max |
N/A |
Shaft End Flow @ RPM |
No Paint |
Major Diameter [Min |
Piston Pumps |
Pressure Port Size, Cover End |
PVH |
Controlled Flow Rate |
0.0 LB |
Pump Series |
Right Hand (CW) |
Seal Material |
Flange |
Cover End Flow @ RPM |
Variable Displacement Open Circuit |
Port Orientation - Cover End |
#10 SAE O-Ring Port - Bottom (Top Plugged) |
Manufacturer Part No. |
2 1/2 in 4-Bolt Flange/Code 61 |
Rotation |
N/A |
Shaft Seal Type |
17 Tooth Splined |
GPM @ 1,800 rpm, Cover End |
59 gpm @ 1800 rpm |
Minor Diameter [Min |
1 1/4 in 4-Bolt Flange/Code 62 |
Shaft End RPM [Max |
Pressure And Flow Compensator |
Port Type |
2.13 in |
Integral Valve Configuration |
Side Port |
Minor Diameter |
Viton |
Pressure Port Size, Shaft End |
None |
Mounting |
59 |
Port Size |
SAE C, 4 Bolt |
Shaft Length |
None |
Mounting Flange |
17 Tooth Splined |
Model No. |
8 |
Displacement Cover End (cu in/revolution) |
None |
Spline Description |
3625 |
Shaft Type |
3,568-3,684 psi |
Port Orientation - Shaft End |
Standard Displacement |