NTN C-UCFC207D1 Flange Block Bearings
The online NTN C-UCFC207D1 Flange Block Bearings 22222 Bearing Number parts 0.26 e - Geometry Factor store gives you immediate access to a selection of more than 1.4 million new, used, remanufactured. Bearing Rolamentos do Brasil Ltda.
What is C-UCFC207D1 bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
C-UCFC207D1 |
| Model No.: |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Spline Description: |
2520V17A8-11BB22R |
| Shaft Key: |
2 1/2 |
| Major Diameter [Min: |
Flange |
| Minor Diameter: |
N/A |
| Shaft Seal Type: |
Standard Pilot |
Product Details
| Model No. |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Spline Description |
2520V17A8-11BB22R |
| Shaft Key |
2 1/2 |
| Major Diameter [Min |
Flange |
| Minor Diameter |
N/A |
| Shaft Seal Type |
Standard Pilot |
| Controlled Flow Rate |
1.09 in |
| Pilot Type |
13 Tooth Splined |
| Mounting Flange |
2520V |
| Shaft Type |
1 3/4 in |
| Port Type |
Buna-N |
| Rotation |
1800 |
| Pressure Port Size, Cover End |
0.7285 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Relief Valve Setting |
16/32 |
| Shaft Length |
1800 |
| Port Orientation - Shaft End |
1800 |
| Port Size |
N/A |
| Max. RPM [Max |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Mounting |
0.873 in |
| Minor Diameter [Max |
0.872 in |
| Shaft End RPM [Max |
0.734 in |
| Cover End Flow @ RPM |
0.723 in |
| Seal Material |
N/A |
| Manufacturer Part No. |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520V17A8-11BB22R |
| Integral Valve Configuration |
3000 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Shaft Dia. |
12 |
| Pressure Port Size, Shaft End |
25.5 |
| Weight |
N/A |
| Cover End Pressure [Max |
Outlet 45° CCW from Inlet |
| Minor Diameter [Min |
Outlet 90° CCW from Inlet |
| Shaft End Flow @ RPM |
3/4 in Code 61 |
| Port Orientation - Cover End |
1 in Code 61 |
| Pump Series |
1.7 |
| Displacement Shaft End (cu in/revolution) |
3.4 |