NTN C-UCF205D1 Flange Block Bearings
Can't 95.25x157.162x36.512 find what you're looking for NTN C-UCF205D1 Flange Block Bearings ? Our expert NTN Bearing 95.25x157.162x36.512 Size (mm) Representatives be in contact with you Bearing Rolamentos do Brasil Ltda. shortly!
What is C-UCF205D1 bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
C-UCF205D1 |
| Pump Series: |
101.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Minor Diameter [Max: |
4525V50A21-11BB22R |
| Spline Description: |
3 1/2 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Pressure Port Size, Shaft End: |
N/A |
| Mounting: |
Standard Pilot |
Product Details
| Pump Series |
101.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Minor Diameter [Max |
4525V50A21-11BB22R |
| Spline Description |
3 1/2 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Mounting |
Standard Pilot |
| Cover End Flow @ RPM |
1.56 in |
| Max. RPM [Max |
14 Tooth Splined |
| Port Type |
4525V |
| Major Diameter [Max |
2 7/16 in |
| Cover End Pressure [Max |
Buna-N |
| Major Diameter [Min |
1800 |
| Port Size |
1.055 in |
| Integral Valve Configuration |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Pilot Type |
1800 |
| Rotation |
1800 |
| Model No. |
N/A |
| Pressure Port Size, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
1.25 in |
| Seal Material |
1.247 in |
| Shaft Length |
1.06 in |
| Shaft Dia. |
1.05 in |
| Cover End RPM [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Relief Valve Setting |
4525V50A21-11BB22R |
| Manufacturer Part No. |
2500 |
| Port Orientation - Shaft End |
2500 |
| Shaft Type |
31.5 |
| Mounting Flange |
75 |
| Weight |
N/A |
| Shaft Seal Type |
Outlet 45° CCW from Inlet |
| Port Orientation - Cover End |
Outlet 90° CCW from Inlet |
| Minor Diameter |
1 in Code 61 |
| Controlled Flow Rate |
1 1/2 in Code 61 |
| Shaft End Pressure [Max |
4.1 |
| Shaft End RPM [Max |
9.9 |