105 x 7.48 Inch | 190 Millimeter x 1.417 Inch | 36 Millimeter NSK 7221BW Angular Contact Ball Bearings
How do I place an EMERGENCY Radial Load Load Direction order for 105 x 7.48 Inch | 190 Millimeter x 1.417 Inch | 36 Millimeter a 105 x 7.48 Inch | 190 Millimeter x 1.417 Inch | 36 Millimeter NSK 7221BW Angular Contact Ball Bearings that I want Flat Outer Ring Shape to pick Bearing Rolamentos do Brasil Ltda. up at a our store?
What is 7221BW bearing interchange？
| Brand Name: |
NSK |
| Model Number: |
7221BW |
| Pressure Port Size, Cover End: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Minor Diameter: |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution): |
2520VQ21A11-11DD20-LH |
| Major Diameter [Min: |
2 1/2 |
| Pump Series: |
Flange |
| Spline Description: |
N/A |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
Product Details
| Pressure Port Size, Cover End |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Minor Diameter |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution) |
2520VQ21A11-11DD20-LH |
| Major Diameter [Min |
2 1/2 |
| Pump Series |
Flange |
| Spline Description |
N/A |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Port Orientation - Cover End |
0.875 in |
| Minor Diameter [Max |
13 Tooth Splined |
| Seal Material |
2520VQ |
| Mounting |
1.375 in |
| Shaft Seal Type |
Buna-N |
| Shaft End Flow @ RPM |
2500 |
| Weight |
0.715 in |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Port Type |
16/32 |
| Shaft Key |
2700 |
| Manufacturer Part No. |
2500 |
| Pressure Port Size, Shaft End |
N/A |
| Mounting Flange |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
0.873 in |
| Shaft Dia. |
0.872 in |
| Model No. |
N/A |
| Cover End RPM [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Port Size |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ21A11-11DD20-LH |
| Shaft Length |
3000 |
| Minor Diameter [Min |
3000 |
| Pilot Type |
16.5 |
| Shaft End RPM [Max |
31.5 |
| Rotation |
w/o Integral Valves |
| Major Diameter [Max |
Outlet 135° CW from Inlet |
| Integral Valve Configuration |
Outlet 90° CW from Inlet |
| Shaft Type |
3/4 in Flange |
| Relief Valve Setting |
1 in Flange |
| GPM @ 1,800 rpm, Cover End |
2.22 |
| Port Orientation - Shaft End |
4.12 |