1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter NSK 7206BYG Angular Contact Ball Bearings
Browse -20 °C T min. 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter NSK 7206BYG Angular Contact Ball Bearings Categories in Bearing Rolamentos do Brasil Ltda. 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter the Manufacturers Online Free. P210- Designation of housing including NSK Bearing.
What is 7206BYG bearing cross reference？
| Brand Name: |
NSK |
| Model Number: |
7206BYG |
| Port Type: |
45.0 LB |
| Rotation: |
Flange Mount |
| Pump Series: |
Left Hand (CCW) |
| Shaft End Pressure [Max: |
2520VQ21A8-1DD20-LH |
| Shaft Seal Type: |
2 1/2 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Cover End Flow @ RPM: |
3/16 in |
| Weight: |
Standard Pilot |
Product Details
| Port Type |
45.0 LB |
| Rotation |
Flange Mount |
| Pump Series |
Left Hand (CCW) |
| Shaft End Pressure [Max |
2520VQ21A8-1DD20-LH |
| Shaft Seal Type |
2 1/2 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Cover End Flow @ RPM |
3/16 in |
| Weight |
Standard Pilot |
| Cover End Pressure [Max |
0.875 in |
| Mounting Flange |
Straight w/ Key |
| GPM @ 1,800 rpm, Shaft End |
2520VQ |
| Major Diameter [Max |
1 15/16 in |
| Max. RPM [Max |
Buna-N |
| Minor Diameter [Min |
2500 |
| Pressure Port Size, Cover End |
N/A |
| Port Orientation - Cover End |
SAE B, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
2700 |
| Shaft Dia. |
2500 |
| Seal Material |
N/A |
| Port Size |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
N/A |
| Manufacturer Part No. |
N/A |
| Spline Description |
N/A |
| Shaft Type |
N/A |
| Model No. |
N/A |
| Displacement Cover End (cu in/revolution) |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length |
2520VQ21A8-1DD20-LH |
| Pilot Type |
3000 |
| Cover End RPM [Max |
3000 |
| Shaft End RPM [Max |
12 |
| Port Orientation - Shaft End |
31.5 |
| Minor Diameter |
w/o Integral Valves |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Major Diameter [Min |
Outlet 90° CW from Inlet |
| Controlled Flow Rate |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Relief Valve Setting |
1.67 |
| Mounting |
4.12 |