2.165 Inch | 55 Millimeter x 4.724 Inch | 120 Millimeter x 1.937 Inch | 49.2 Millimeter NSK 3311B-2ZNRTN Angular Contact Ball Bearings
2.165 Inch | 55 Millimeter x 4.724 Inch | 120 Millimeter x 1.937 Inch | 49.2 Millimeter NSK 3311B-2ZNRTN Angular Contact Ball Bearings Engineering Calculator , NSK Bearing Manufacturing 2.165 Inch | 55 Millimeter x 4.724 Inch | 120 Millimeter x 1.937 Inch | 49.2 Millimeter Service . Get Your Bearing Rolamentos do Brasil Ltda. No Bearing Retained Free.
What is 3311B-2ZNRTN bearing cross reference？
| Brand Name: |
NSK |
| Model Number: |
3311B-2ZNRTN |
| Manufacturer Part No.: |
101.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft End RPM [Max: |
Right Hand (CW) |
| Shaft Key: |
4525VQ60A17-11BB20 |
| Seal Material: |
3 1/2 |
| Mounting: |
Flange |
| Port Orientation - Shaft End: |
N/A |
| Pump Series: |
Standard Pilot |
Product Details
| Manufacturer Part No. |
101.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft End RPM [Max |
Right Hand (CW) |
| Shaft Key |
4525VQ60A17-11BB20 |
| Seal Material |
3 1/2 |
| Mounting |
Flange |
| Port Orientation - Shaft End |
N/A |
| Pump Series |
Standard Pilot |
| Integral Valve Configuration |
1.25 in |
| Cover End Flow @ RPM |
14 Tooth Splined |
| Weight |
4525VQ |
| Major Diameter [Max |
1.9375 in |
| Model No. |
Buna-N |
| Cover End Pressure [Max |
2200 |
| Shaft Length |
1.04 in |
| Minor Diameter [Min |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Controlled Flow Rate |
2200 |
| Mounting Flange |
2200 |
| Shaft End Pressure [Max |
N/A |
| Rotation |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
1.248 in |
| Shaft Dia. |
1.247 in |
| Major Diameter [Min |
N/A |
| Port Size |
N/A |
| Port Orientation - Cover End |
N/A |
| Pressure Port Size, Cover End |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Minor Diameter |
4525VQ60A17-11BB20 |
| Pilot Type |
3000 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Displacement Shaft End (cu in/revolution) |
25.5 |
| Shaft Seal Type |
90 |
| Shaft Type |
w/o Integral Valves |
| Cover End RPM [Max |
Outlet 45° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CCW from Inlet |
| Spline Description |
1 in Flange |
| Port Type |
1 1/2 in Flange |
| Shaft End Flow @ RPM |
3.37 |
| Relief Valve Setting |
11.8 |