NSK 32232J Tapered Roller Bearing Assemblies
The online NSK 32232J Tapered Roller Bearing Assemblies parts store gives 37.700 mm Da - Outer Ring Backing Diameter you Bearing Rolamentos do Brasil Ltda. 20 mm d immediate access to a selection of more than 1.4 million 12 mm Bearing Width new, used, remanufactured.
What is 32232J bearing cross reference？
| Brand Name: |
NSK |
| Model Number: |
32232J |
| Shaft Dia.: |
76.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Shaft Type: |
3525VQ25A21-11DD20 |
| Shaft Key: |
3 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| Shaft Dia. |
76.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Shaft Type |
3525VQ25A21-11DD20 |
| Shaft Key |
3 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Port Type |
Standard Pilot |
| Shaft Seal Type |
1.25 in |
| Pump Series |
14 Tooth Splined |
| Rotation |
3525VQ |
| Integral Valve Configuration |
1 15/16 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Mounting Flange |
2500 |
| Shaft Length |
1.04 in |
| Shaft End RPM [Max |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Weight |
2500 |
| Major Diameter [Max |
2500 |
| Controlled Flow Rate |
N/A |
| Manufacturer Part No. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
1.248 in |
| Port Size |
1.247 in |
| Spline Description |
N/A |
| Mounting |
N/A |
| Max. RPM [Max |
N/A |
| Model No. |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
3525VQ25A21-11DD20 |
| Pressure Port Size, Cover End |
3000 |
| Cover End RPM [Max |
3000 |
| Major Diameter [Min |
31.5 |
| Minor Diameter [Min |
37.5 |
| Displacement Cover End (cu in/revolution) |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 135° CW from Inlet |
| Cover End Flow @ RPM |
Outlet 90° CW from Inlet |
| Cover End Pressure [Max |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Seal Material |
4.12 |
| Pilot Type |
4.98 |