NSK 2202J Self Aligning Ball Bearings
170 Million used NSK 2202J Self Aligning Ball Bearings instantly searchable. Shop our 40 mm A large Bearing Rolamentos do Brasil Ltda. selection of parts based on brand, price, description, and location. Order the NSK Bearing with stock ...
What is 2202J bearing interchange？
| Brand Name: |
NSK |
| Model Number: |
2202J |
| Shaft End RPM [Max: |
45.0 LB |
| Pilot Type: |
Flange Mount |
| Minor Diameter [Min: |
Left Hand (CCW) |
| Manufacturer Part No.: |
2520VQS17C8-297DA20L |
| Shaft Type: |
2 1/2 |
| Shaft End Flow @ RPM: |
Flange |
| Pump Series: |
N/A |
| Shaft Dia.: |
SAE J744 Pilot |
Product Details
| Shaft End RPM [Max |
45.0 LB |
| Pilot Type |
Flange Mount |
| Minor Diameter [Min |
Left Hand (CCW) |
| Manufacturer Part No. |
2520VQS17C8-297DA20L |
| Shaft Type |
2 1/2 |
| Shaft End Flow @ RPM |
Flange |
| Pump Series |
N/A |
| Shaft Dia. |
SAE J744 Pilot |
| Port Orientation - Cover End |
0.875 in |
| Model No. |
13 Tooth Splined |
| Controlled Flow Rate |
2520VQ |
| Seal Material |
1 1/4 in |
| Minor Diameter [Max |
Buna-N |
| Mounting Flange |
2500 |
| GPM @ 1,800 rpm, Cover End |
0.715 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Shaft Length |
Single Shaft Seal |
| Cover End Flow @ RPM |
16/32 |
| Displacement Shaft End (cu in/revolution) |
2700 |
| Spline Description |
2500 |
| Rotation |
N/A |
| Weight |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.858 in |
| Shaft End Pressure [Max |
0.852 in |
| Max. RPM [Max |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Integral Valve Configuration |
N/A |
| GPM @ 1,800 rpm, Shaft End |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter |
2520VQS17C8-297DA20L |
| Shaft Key |
3000 |
| Major Diameter [Min |
3000 |
| Cover End Pressure [Max |
12 |
| Relief Valve Setting |
25.5 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Mounting |
Outlet 135° CCW from Inlet |
| Port Size |
Outlet 90° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
1 1/16 in SAE O-Ring |
| Port Orientation - Shaft End |
1 5/16 in SAE O-Ring |
| Shaft Seal Type |
1.67 |
| Port Type |
3.37 |