2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter KOYO IR-4016 Needle Non Thrust Roller Bearings
100% Authentic. 2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter KOYO IR-4016 Needle Non Thrust Roller Bearings Highest 2.5 Inch | 63.5 Millimeter x 2.75 Inch | 69.85 Millimeter x 1.015 Inch | 25.781 Millimeter Quality. Certified Bearing Rolamentos do Brasil Ltda. Supplier.
What is IR-4016 bearing interchange?
Brand Name: |
KOYO |
Model Number: |
IR-4016 |
Port Size: |
45.0 LB |
Shaft Dia.: |
Flange Mount |
Pump Series: |
Left Hand (CCW) |
Port Orientation - Cover End: |
2520VQ17A12-1CC20LH |
Major Diameter [Min: |
2 1/2 |
Shaft Seal Type: |
Flange |
Minor Diameter [Min: |
3/16 in |
Cover End Pressure [Max: |
Standard Pilot |
Product Details
Port Size |
45.0 LB |
Shaft Dia. |
Flange Mount |
Pump Series |
Left Hand (CCW) |
Port Orientation - Cover End |
2520VQ17A12-1CC20LH |
Major Diameter [Min |
2 1/2 |
Shaft Seal Type |
Flange |
Minor Diameter [Min |
3/16 in |
Cover End Pressure [Max |
Standard Pilot |
Spline Description |
0.875 in |
Cover End Flow @ RPM |
Straight w/ Key |
GPM @ 1,800 rpm, Cover End |
2520VQ |
Shaft Length |
1 15/16 in |
Displacement Cover End (cu in/revolution) |
Buna-N |
Port Type |
2500 |
Pilot Type |
N/A |
Major Diameter [Max |
SAE B, 2 Bolt |
Pressure Port Size, Shaft End |
Single Shaft Seal |
Controlled Flow Rate |
N/A |
Minor Diameter [Max |
2700 |
Shaft Type |
2500 |
Pressure Port Size, Cover End |
N/A |
Seal Material |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Port Orientation - Shaft End |
N/A |
Integral Valve Configuration |
N/A |
Mounting |
N/A |
Rotation |
N/A |
Shaft End RPM [Max |
N/A |
Model No. |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Minor Diameter |
2520VQ17A12-1CC20LH |
GPM @ 1,800 rpm, Shaft End |
2300 |
Shaft Key |
3000 |
Relief Valve Setting |
18 |
Shaft End Flow @ RPM |
25.5 |
Manufacturer Part No. |
w/o Integral Valves |
Weight |
Outlet 45° CW from Inlet |
Max. RPM [Max |
Outlet Inline w/Inlet |
Shaft End Pressure [Max |
3/4 in Flange |
Displacement Shaft End (cu in/revolution) |
1 in Flange |
Mounting Flange |
2.41 |
Cover End RPM [Max |
3.37 |