0.315 Inch | 8 Millimeter x 0.472 Inch | 12 Millimeter x 0.394 Inch | 10 Millimeter KOYO BK0810A Needle Non Thrust Roller Bearings
YOU’LL FIND AN 2.90 Y1 - Geometry Factor EXTENSIVE SELECTION 0.315 Inch | 8 Millimeter x 0.472 Inch | 12 Millimeter x 0.394 Inch | 10 Millimeter OF 0.315 Inch | 8 Millimeter x 0.472 Inch | 12 Millimeter x 0.394 Inch | 10 Millimeter KOYO BK0810A Needle Non Thrust Roller Bearings FOR SALE. Bearing Rolamentos do Brasil Ltda.
What is BK0810A bearing interchange？
| Brand Name: |
KOYO |
| Model Number: |
BK0810A |
| Major Diameter [Min: |
45.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft Type: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: |
2520VQ17A11-11AA20-LH |
| Port Orientation - Cover End: |
2 1/2 |
| Port Type: |
Flange |
| Cover End RPM [Max: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
Product Details
| Major Diameter [Min |
45.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft Type |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End |
2520VQ17A11-11AA20-LH |
| Port Orientation - Cover End |
2 1/2 |
| Port Type |
Flange |
| Cover End RPM [Max |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Displacement Shaft End (cu in/revolution) |
0.875 in |
| Shaft End Flow @ RPM |
13 Tooth Splined |
| Relief Valve Setting |
2520VQ |
| Pressure Port Size, Shaft End |
1 3/8 in |
| Minor Diameter [Min |
Buna-N |
| Cover End Flow @ RPM |
2500 |
| Mounting Flange |
0.715 in |
| Port Size |
SAE B, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Shaft Dia. |
16/32 |
| Manufacturer Part No. |
2700 |
| Spline Description |
2500 |
| Seal Material |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
0.873 in |
| Shaft Length |
0.872 in |
| Pump Series |
N/A |
| Shaft End RPM [Max |
N/A |
| Cover End Pressure [Max |
N/A |
| Shaft Seal Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
2520VQ17A11-11AA20-LH |
| Max. RPM [Max |
3000 |
| Weight |
3000 |
| Rotation |
16.5 |
| Model No. |
25.5 |
| Minor Diameter |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CCW from Inlet |
| Integral Valve Configuration |
Outlet Opposite Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Mounting |
1 in Flange |
| Minor Diameter [Max |
2.22 |
| Pilot Type |
3.37 |