INA W1/4 Thrust Ball Bearing
Welcome to the INA W1/4 Thrust Ball Bearing 575.000 mm Da - Outer Ring Backing Diameter online Bearing Rolamentos do Brasil Ltda. 4.000 mm R - Inner Ring To Clear Radius1 0.29 e - ISO Factor3 seller.
What is W1/4 bearing interchange？
| Brand Name: |
INA |
| Model Number: |
W1/4 |
| Pressure Port Size, Cover End: |
75.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Cover End Flow @ RPM: |
Right Hand (CW) |
| Seal Material: |
3520VQ30A8-11CC20 |
| Shaft Seal Type: |
3 |
| Minor Diameter: |
Flange |
| Minor Diameter [Max: |
N/A |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Pressure Port Size, Cover End |
75.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Cover End Flow @ RPM |
Right Hand (CW) |
| Seal Material |
3520VQ30A8-11CC20 |
| Shaft Seal Type |
3 |
| Minor Diameter |
Flange |
| Minor Diameter [Max |
N/A |
| Manufacturer Part No. |
Standard Pilot |
| Pump Series |
1.25 in |
| Mounting |
14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
3520VQ |
| Relief Valve Setting |
1.9375 in |
| Displacement Shaft End (cu in/revolution) |
6 |
| Minor Diameter [Min |
Buna-N |
| Model No. |
2500 |
| Pilot Type |
1.04 in |
| Displacement Cover End (cu in/revolution) |
SAE C, 2 Bolt |
| Port Type |
Single Shaft Seal |
| Port Orientation - Cover End |
12/24 |
| Shaft End Pressure [Max |
2500 |
| Cover End Pressure [Max |
2500 |
| Cover End RPM [Max |
N/A |
| Mounting Flange |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Rotation |
1.248 in |
| Spline Description |
1.247 in |
| Shaft Dia. |
N/A |
| Controlled Flow Rate |
N/A |
| Shaft Key |
N/A |
| Shaft Length |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
3520VQ30A8-11CC20 |
| Weight |
3000 |
| Major Diameter [Max |
3000 |
| Port Size |
12 |
| Shaft Type |
45 |
| Integral Valve Configuration |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Max. RPM [Max |
3/4 in Flange |
| Major Diameter [Min |
1 1/4 in Flange |
| Shaft End Flow @ RPM |
1.7 |