2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.063 Inch | 27 Millimeter INA K60X68X27 Needle Non Thrust Roller Bearings
How do I place an 90 mm J EMERGENCY order for a 2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.063 Inch | 27 Millimeter INA K60X68X27 Needle Non Thrust Roller Bearings that I want to pick Bearing Rolamentos do Brasil Ltda. up at 2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.063 Inch | 27 Millimeter a our store?
What is K60X68X27 bearing interchange？
| Brand Name: |
INA |
| Model Number: |
K60X68X27 |
| Minor Diameter [Max: |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Shaft Dia.: |
Left Hand (CCW) |
| Major Diameter [Max: |
3525VQ25A21-11DD20-LH |
| Model No.: |
3 |
| Cover End Flow @ RPM: |
Flange |
| Rotation: |
N/A |
| Shaft Type: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
76.0 LB |
| Shaft Length |
Flange Mount |
| Shaft Dia. |
Left Hand (CCW) |
| Major Diameter [Max |
3525VQ25A21-11DD20-LH |
| Model No. |
3 |
| Cover End Flow @ RPM |
Flange |
| Rotation |
N/A |
| Shaft Type |
Standard Pilot |
| Weight |
1.25 in |
| Mounting Flange |
14 Tooth Splined |
| Minor Diameter |
3525VQ |
| Displacement Cover End (cu in/revolution) |
1.9375 in |
| Cover End Pressure [Max |
Buna-N |
| Mounting |
2500 |
| Relief Valve Setting |
1.04 in |
| Pressure Port Size, Cover End |
SAE C, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Port Orientation - Shaft End |
12/24 |
| Shaft End Pressure [Max |
2500 |
| Manufacturer Part No. |
2500 |
| Minor Diameter [Min |
N/A |
| Shaft Seal Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
1.248 in |
| Pilot Type |
1.247 in |
| Major Diameter [Min |
N/A |
| Port Type |
N/A |
| Port Orientation - Cover End |
N/A |
| Controlled Flow Rate |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Size |
3525VQ25A21-11DD20-LH |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Pressure Port Size, Shaft End |
3000 |
| Shaft End RPM [Max |
31.5 |
| Spline Description |
37.5 |
| Seal Material |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 135° CW from Inlet |
| Max. RPM [Max |
Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Pump Series |
1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End |
4.12 |
| Integral Valve Configuration |
4.98 |