0.551 Inch | 14 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter INA K14X17X10-L Needle Non Thrust Roller Bearings
Request A Quote For 0.551 Inch | 14 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter Your Special 0.551 Inch | 14 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter INA K14X17X10-L Needle Non Thrust Roller Bearings Needs Bearing Rolamentos do Brasil Ltda. Today! Free INA Bearing Quotes. ISO 9001 24.6 mm S certified.
What is K14X17X10-L bearing cross reference?
Brand Name: |
INA |
Model Number: |
K14X17X10-L |
Pressure Port Size, Cover End: |
75.0 LB |
Port Orientation - Shaft End: |
Flange Mount |
Shaft Length: |
Right Hand (CW) |
Max. RPM [Max: |
3520VQ35A5-1BB20 |
Port Size: |
3 |
Major Diameter [Max: |
Flange |
GPM @ 1,800 rpm, Shaft End: |
5/16 in |
Rotation: |
Standard Pilot |
Product Details
Pressure Port Size, Cover End |
75.0 LB |
Port Orientation - Shaft End |
Flange Mount |
Shaft Length |
Right Hand (CW) |
Max. RPM [Max |
3520VQ35A5-1BB20 |
Port Size |
3 |
Major Diameter [Max |
Flange |
GPM @ 1,800 rpm, Shaft End |
5/16 in |
Rotation |
Standard Pilot |
Shaft End Flow @ RPM |
1.25 in |
Manufacturer Part No. |
Straight w/ Key |
Displacement Shaft End (cu in/revolution) |
3520VQ |
Cover End Flow @ RPM |
2 1/2 in |
Model No. |
Buna-N |
Displacement Cover End (cu in/revolution) |
2400 |
Relief Valve Setting |
N/A |
Mounting Flange |
SAE C, 2 Bolt |
Seal Material |
Single Shaft Seal |
GPM @ 1,800 rpm, Cover End |
N/A |
Pilot Type |
2500 |
Major Diameter [Min |
2400 |
Minor Diameter [Max |
N/A |
Shaft Dia. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Type |
N/A |
Cover End RPM [Max |
N/A |
Port Orientation - Cover End |
N/A |
Pump Series |
N/A |
Weight |
N/A |
Minor Diameter [Min |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Shaft End Pressure [Max |
3520VQ35A5-1BB20 |
Minor Diameter |
3000 |
Shaft Key |
3000 |
Pressure Port Size, Shaft End |
7.5 |
Spline Description |
52.5 |
Integral Valve Configuration |
w/o Integral Valves |
Shaft End RPM [Max |
Outlet 45° CCW from Inlet |
Shaft Seal Type |
Outlet 90° CCW from Inlet |
Controlled Flow Rate |
3/4 in Flange |
Cover End Pressure [Max |
1 1/4 in Flange |
Mounting |
1.1 |
Shaft Type |
6.88 |