2.559 Inch | 65 Millimeter x 2.953 Inch | 75 Millimeter x 1.102 Inch | 28 Millimeter INA IR65X75X28 Needle Non Thrust Roller Bearings
2.559 Inch | 65 Millimeter x 2.953 Inch | 75 Millimeter x 1.102 Inch | 28 Millimeter INA IR65X75X28 Needle Non Thrust Roller Bearings Bearing Rolamentos do Brasil Ltda. SEARCH 12.50 in Dimension D Min - Whether it's agriculture or construction equipment your working on, Has 2.559 Inch | 65 Millimeter x 2.953 Inch | 75 Millimeter x 1.102 Inch | 28 Millimeter theINA Bearing you need.
What is IR65X75X28 bearing cross reference？
| Brand Name: |
INA |
| Model Number: |
IR65X75X28 |
| Pilot Type: |
76.0 LB |
| Seal Material: |
Flange Mount |
| Controlled Flow Rate: |
Left Hand (CCW) |
| Pressure Port Size, Cover End: |
3525VQ30A12-11AA20-LH |
| Shaft End Flow @ RPM: |
3 |
| Port Orientation - Shaft End: |
Flange |
| Mounting: |
N/A |
| Minor Diameter: |
Standard Pilot |
Product Details
| Pilot Type |
76.0 LB |
| Seal Material |
Flange Mount |
| Controlled Flow Rate |
Left Hand (CCW) |
| Pressure Port Size, Cover End |
3525VQ30A12-11AA20-LH |
| Shaft End Flow @ RPM |
3 |
| Port Orientation - Shaft End |
Flange |
| Mounting |
N/A |
| Minor Diameter |
Standard Pilot |
| Integral Valve Configuration |
1.25 in |
| Relief Valve Setting |
14 Tooth Splined |
| Pressure Port Size, Shaft End |
3525VQ |
| Minor Diameter [Min |
1.9375 in |
| Cover End RPM [Max |
Buna-N |
| Cover End Flow @ RPM |
2500 |
| Mounting Flange |
1.04 in |
| Port Type |
SAE C, 2 Bolt |
| Port Orientation - Cover End |
Single Shaft Seal |
| Major Diameter [Min |
12/24 |
| Minor Diameter [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Model No. |
N/A |
| Shaft Dia. |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Rotation |
1.248 in |
| Manufacturer Part No. |
1.247 in |
| Shaft Type |
N/A |
| Shaft Key |
N/A |
| Shaft Seal Type |
N/A |
| Cover End Pressure [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Size |
3525VQ30A12-11AA20-LH |
| Displacement Cover End (cu in/revolution) |
3000 |
| Shaft End Pressure [Max |
3000 |
| Major Diameter [Max |
18 |
| Displacement Shaft End (cu in/revolution) |
45 |
| Spline Description |
w/o Integral Valves |
| Weight |
Outlet 135° CCW from Inlet |
| Shaft Length |
Outlet Opposite Inlet |
| Pump Series |
1 in Flange |
| Shaft End RPM [Max |
1 1/4 in Flange |
| Max. RPM [Max |
2.45 |
| GPM @ 1,800 rpm, Shaft End |
5.96 |