INA GIHRK25-DO Spherical Plain Bearings - Rod Ends
Online shopping INA GIHRK25-DO Spherical Plain Bearings - Rod Ends from a great selection Black Oxide Coating Holder Surface Treatment at Store. Deep Groove Ball Bea Bearing Used ... INA Bearing Bearing Rolamentos do Brasil Ltda. Accessories.
What is GIHRK25-DO bearing cross reference?
Brand Name: |
INA |
Model Number: |
GIHRK25-DO |
Port Orientation - Shaft End: |
95.0 LB |
Major Diameter [Min: |
Flange Mount |
Integral Valve Configuration: |
Right Hand (CW) |
Cover End RPM [Max: |
4520V60A8-11DD22R |
Displacement Cover End (cu in/revolution): |
3 1/2 |
Mounting Flange: |
Flange |
Pressure Port Size, Shaft End: |
N/A |
Minor Diameter: |
Standard Pilot |
Product Details
Port Orientation - Shaft End |
95.0 LB |
Major Diameter [Min |
Flange Mount |
Integral Valve Configuration |
Right Hand (CW) |
Cover End RPM [Max |
4520V60A8-11DD22R |
Displacement Cover End (cu in/revolution) |
3 1/2 |
Mounting Flange |
Flange |
Pressure Port Size, Shaft End |
N/A |
Minor Diameter |
Standard Pilot |
Shaft Seal Type |
1.56 in |
Pressure Port Size, Cover End |
14 Tooth Splined |
Relief Valve Setting |
4520V |
Seal Material |
2 7/16 in |
Controlled Flow Rate |
Buna-N |
Mounting |
1800 |
Shaft Dia. |
1.055 in |
Pilot Type |
SAE C, 2 Bolt |
Shaft End RPM [Max |
Single Shaft Seal |
Minor Diameter [Max |
12/24 |
Max. RPM [Max |
1800 |
Manufacturer Part No. |
1800 |
Cover End Pressure [Max |
N/A |
Weight |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Cover End Flow @ RPM |
1.25 in |
Pump Series |
1.247 in |
GPM @ 1,800 rpm, Cover End |
1.06 in |
Displacement Shaft End (cu in/revolution) |
1.05 in |
Shaft End Pressure [Max |
N/A |
GPM @ 1,800 rpm, Shaft End |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Minor Diameter [Min |
4520V60A8-11DD22R |
Shaft Key |
3000 |
Shaft Type |
2500 |
Port Size |
12 |
Rotation |
90 |
Major Diameter [Max |
N/A |
Model No. |
Outlet 135° CW from Inlet |
Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
Shaft Length |
3/4 in Code 61 |
Port Orientation - Cover End |
1 1/2 in Code 61 |
Spline Description |
1.7 |
Port Type |
11.8 |