INA 20J04 Thrust Ball Bearing
INA 20J04 Thrust Ball Bearing 22 Nm Recommended tightening torque for set screw 23.2 kN C0 Manufacturers , Online FC210- Designation of housing Wholesale Suppliers ! Bearing Rolamentos do Brasil Ltda.
What is 20J04 bearing interchange？
| Brand Name: |
INA |
| Model Number: |
20J04 |
| Pilot Type: |
45.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Pump Series: |
Left Hand (CCW) |
| Cover End Pressure [Max: |
2520VQ21A11-1CB20LH |
| Seal Material: |
2 1/2 |
| Minor Diameter: |
Flange |
| Max. RPM [Max: |
3/16 in |
| Shaft Length: |
Standard Pilot |
Product Details
| Pilot Type |
45.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Pump Series |
Left Hand (CCW) |
| Cover End Pressure [Max |
2520VQ21A11-1CB20LH |
| Seal Material |
2 1/2 |
| Minor Diameter |
Flange |
| Max. RPM [Max |
3/16 in |
| Shaft Length |
Standard Pilot |
| Port Size |
0.875 in |
| Integral Valve Configuration |
Straight w/ Key |
| Weight |
2520VQ |
| Shaft Seal Type |
1.9375 in |
| Relief Valve Setting |
Buna-N |
| Minor Diameter [Max |
2500 |
| Minor Diameter [Min |
N/A |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Shaft End Flow @ RPM |
2700 |
| Shaft Type |
2500 |
| Controlled Flow Rate |
N/A |
| Model No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
N/A |
| Cover End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft Key |
N/A |
| Displacement Cover End (cu in/revolution) |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
2520VQ21A11-1CB20LH |
| Manufacturer Part No. |
3000 |
| Shaft Dia. |
3000 |
| Port Orientation - Cover End |
16.5 |
| Cover End Flow @ RPM |
31.5 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Shaft End Pressure [Max |
Outlet 45° CCW from Inlet |
| Spline Description |
Outlet Inline w/Inlet |
| Port Type |
3/4 in Flange |
| Pressure Port Size, Cover End |
1 in Flange |
| Mounting |
2.22 |
| Rotation |
4.12 |