1.575 Inch | 40 Millimeter x 1.969 Inch | 50 Millimeter x 1.181 Inch | 30 Millimeter IKO TA4030Z Needle Non Thrust Roller Bearings
Browse 1.575 Inch | 40 Millimeter x 1.969 Inch | 50 Millimeter x 1.181 Inch | 30 Millimeter 1.25 mm tang thickness: 1.575 Inch | 40 Millimeter x 1.969 Inch | 50 Millimeter x 1.181 Inch | 30 Millimeter IKO TA4030Z Needle Non Thrust Roller Bearings Categories in the Manufacturers Bearing Rolamentos do Brasil Ltda. Online Free. including IKO Bearing. Steel material:
What is TA4030Z bearing cross reference？
| Brand Name: |
IKO |
| Model Number: |
TA4030Z |
| Shaft Length: |
95.0 LB |
| Pressure Port Size, Cover End: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
4520V60A12-1DC22R |
| Relief Valve Setting: |
3 1/2 |
| Shaft Key: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
5/16 in |
| Pump Series: |
Standard Pilot |
Product Details
| Shaft Length |
95.0 LB |
| Pressure Port Size, Cover End |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
4520V60A12-1DC22R |
| Relief Valve Setting |
3 1/2 |
| Shaft Key |
Flange |
| GPM @ 1,800 rpm, Cover End |
5/16 in |
| Pump Series |
Standard Pilot |
| Cover End RPM [Max |
1.25 in |
| Port Size |
Straight w/ Key |
| Shaft End Flow @ RPM |
4520V |
| Shaft Type |
2.4375 in |
| Major Diameter [Max |
Buna-N |
| Spline Description |
1800 |
| Mounting |
N/A |
| Minor Diameter |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Controlled Flow Rate |
1800 |
| Rotation |
N/A |
| Pressure Port Size, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Pilot Type |
N/A |
| Port Orientation - Shaft End |
N/A |
| Major Diameter [Min |
N/A |
| Manufacturer Part No. |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
4520V60A12-1DC22R |
| Displacement Cover End (cu in/revolution) |
3000 |
| Max. RPM [Max |
2500 |
| Shaft End Pressure [Max |
18 |
| Port Type |
90 |
| Integral Valve Configuration |
N/A |
| Cover End Flow @ RPM |
Outlet 45° CW from Inlet |
| Seal Material |
Outlet 90° CW from Inlet |
| Mounting Flange |
3/4 in Code 61 |
| Weight |
1 1/2 in Code 61 |
| Shaft Dia. |
2.5 |
| Port Orientation - Cover End |
11.8 |