2.677 Inch | 68 Millimeter x 3.346 Inch | 85 Millimeter x 1.772 Inch | 45 Millimeter IKO RNA6912UU Needle Non Thrust Roller Bearings
2.677 Inch | 68 Millimeter x 3.346 Inch | 85 Millimeter x 1.772 Inch | 45 Millimeter IKO RNA6912UU Needle Non Thrust Roller Bearings, Units and Housings CAD models , Bearing Rolamentos do Brasil Ltda. 1.1810 in cone width: IKO Bearing 2.677 Inch | 68 Millimeter x 3.346 Inch | 85 Millimeter x 1.772 Inch | 45 Millimeter Manufacturing Service . Get Your Free.
What is RNA6912UU bearing interchange？
| Brand Name: |
IKO |
| Model Number: |
RNA6912UU |
| Shaft End Pressure [Max: |
118.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Mounting: |
4535VQ60A25-1DD20 |
| Shaft End RPM [Max: |
4 |
| Pilot Type: |
Flange |
| Pressure Port Size, Cover End: |
5/16 in |
| Minor Diameter [Max: |
Standard Pilot |
Product Details
| Shaft End Pressure [Max |
118.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Mounting |
4535VQ60A25-1DD20 |
| Shaft End RPM [Max |
4 |
| Pilot Type |
Flange |
| Pressure Port Size, Cover End |
5/16 in |
| Minor Diameter [Max |
Standard Pilot |
| Major Diameter [Min |
1.25 in |
| Cover End RPM [Max |
Straight w/ Key |
| Seal Material |
4535VQ |
| Weight |
1 15/16 in |
| Shaft Type |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2200 |
| Port Size |
N/A |
| Mounting Flange |
SAE C, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Spline Description |
N/A |
| Shaft Key |
2200 |
| Cover End Pressure [Max |
2200 |
| Max. RPM [Max |
N/A |
| Port Orientation - Shaft End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Model No. |
N/A |
| Shaft Seal Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft Dia. |
N/A |
| Major Diameter [Max |
N/A |
| Relief Valve Setting |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
4535VQ60A25-1DD20 |
| Minor Diameter |
3000 |
| Cover End Flow @ RPM |
2500 |
| Controlled Flow Rate |
37.5 |
| Rotation |
90 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |
| Shaft Length |
Outlet 90° CW from Inlet |
| Port Orientation - Cover End |
Outlet 90° CW from Inlet |
| Shaft End Flow @ RPM |
1 1/4 in Flange |
| Port Type |
1 1/2 in Flange |
| Pressure Port Size, Shaft End |
4.98 |
| Minor Diameter [Min |
11.8 |