0.472 Inch | 12 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter IKO KT121710C3 Needle Non Thrust Roller Bearings
What is the 3.5000 in d best place 0.472 Inch | 12 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter to buy 0.472 Inch | 12 Millimeter x 0.669 Inch | 17 Millimeter x 0.394 Inch | 10 Millimeter IKO KT121710C3 Needle Non Thrust Roller Bearings Bearing Rolamentos do Brasil Ltda. online? Lubrication Fitting lubrication type: IKO Bearing Manufacturing Service .
What is KT121710C3 bearing cross reference？
| Brand Name: |
IKO |
| Model Number: |
KT121710C3 |
| Minor Diameter [Min: |
101.0 LB |
| Pressure Port Size, Cover End: |
Flange Mount |
| Shaft End Flow @ RPM: |
Left Hand (CCW) |
| Shaft Key: |
4525VQ60A14-11AA20-LH |
| Cover End RPM [Max: |
3 1/2 |
| Pump Series: |
Flange |
| Rotation: |
N/A |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Minor Diameter [Min |
101.0 LB |
| Pressure Port Size, Cover End |
Flange Mount |
| Shaft End Flow @ RPM |
Left Hand (CCW) |
| Shaft Key |
4525VQ60A14-11AA20-LH |
| Cover End RPM [Max |
3 1/2 |
| Pump Series |
Flange |
| Rotation |
N/A |
| Manufacturer Part No. |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Spline Description |
14 Tooth Splined |
| Shaft End RPM [Max |
4525VQ |
| Integral Valve Configuration |
1 15/16 in |
| Shaft End Pressure [Max |
Buna-N |
| Port Orientation - Shaft End |
2200 |
| Shaft Seal Type |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
12/24 |
| Max. RPM [Max |
2200 |
| Port Orientation - Cover End |
2200 |
| Relief Valve Setting |
N/A |
| Pressure Port Size, Shaft End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Mounting |
1.248 in |
| Controlled Flow Rate |
1.247 in |
| Model No. |
N/A |
| Shaft Type |
N/A |
| Port Type |
N/A |
| Major Diameter [Min |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
4525VQ60A14-11AA20-LH |
| Seal Material |
3000 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Minor Diameter |
21 |
| Minor Diameter [Max |
90 |
| Shaft Dia. |
w/o Integral Valves |
| Port Size |
Outlet 135° CCW from Inlet |
| Mounting Flange |
Outlet Opposite Inlet |
| Weight |
1 in Flange |
| Pilot Type |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
2.77 |
| Major Diameter [Max |
11.8 |