0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM88 Needle Non Thrust Roller Bearings
Browse 0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM88 Needle Non Thrust Roller Bearings Categories in the Manufacturers Online 0.5 Inch | 12.7 Millimeter x 0.688 Inch | 17.475 Millimeter x 0.5 Inch | 12.7 Millimeter Free. including IKO Bearing. Bearing Rolamentos do Brasil Ltda.
What is BAM88 bearing interchange？
| Brand Name: |
IKO |
| Model Number: |
BAM88 |
| Minor Diameter: |
30.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Mounting Flange: |
Right Hand (CW) |
| Port Orientation - Cover End: |
V2010-1F9S3S-11CC12 |
| Pressure Port Size, Shaft End: |
1.5 |
| Shaft End Flow @ RPM: |
Flange |
| Shaft Dia.: |
N/A |
| Port Orientation - Shaft End: |
N/A |
Product Details
| Minor Diameter |
30.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Mounting Flange |
Right Hand (CW) |
| Port Orientation - Cover End |
V2010-1F9S3S-11CC12 |
| Pressure Port Size, Shaft End |
1.5 |
| Shaft End Flow @ RPM |
Flange |
| Shaft Dia. |
N/A |
| Port Orientation - Shaft End |
N/A |
| Relief Valve Setting |
0.875 in |
| Mounting |
13 Tooth Splined |
| Pressure Port Size, Cover End |
V2010 |
| Spline Description |
1 5/16 in |
| Pump Series |
Double |
| Shaft Seal Type |
Buna-N |
| Weight |
2800 |
| Shaft Length |
0.728 in |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Shaft Key |
16/32 |
| Cover End Flow @ RPM |
3000 |
| Shaft End RPM [Max |
2800 |
| Integral Valve Configuration |
N/A |
| Controlled Flow Rate |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
1.8 |
| Seal Material |
0.734 in |
| GPM @ 1,800 rpm, Shaft End |
0.723 in |
| Cover End RPM [Max |
N/A |
| Cover End Pressure [Max |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Port Type |
V2010-1F9S3S-11CC12 |
| Pilot Type |
2500 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Minor Diameter [Min |
4.5 |
| Major Diameter [Max |
13.5 |
| Rotation |
N/A |
| Model No. |
Outlet 45° CW from Inlet |
| Shaft Type |
Outlet Inline w/Inlet |
| Major Diameter [Min |
1/2 in SAE O-Ring |
| Manufacturer Part No. |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.6 |