0.25 Inch | 6.35 Millimeter x 0.438 Inch | 11.125 Millimeter x 0.438 Inch | 11.125 Millimeter IKO BAM47 Needle Non Thrust Roller Bearings
What 0.25 Inch | 6.35 Millimeter x 0.438 Inch | 11.125 Millimeter x 0.438 Inch | 11.125 Millimeter is Bearing Rolamentos do Brasil Ltda. the SAE 841, CT-1000-K26 standards met: best place to buy Plain Sleeve sleeve bearing type: 0.25 Inch | 6.35 Millimeter x 0.438 Inch | 11.125 Millimeter x 0.438 Inch | 11.125 Millimeter IKO BAM47 Needle Non Thrust Roller Bearings online? IKO Bearing Manufacturing Service .
What is BAM47 bearing interchange？
| Brand Name: |
IKO |
| Model Number: |
BAM47 |
| Mounting: |
30.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
V2010-1F12S2S-11DD12 |
| Max. RPM [Max: |
1 1/2 |
| Manufacturer Part No.: |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Minor Diameter: |
N/A |
Product Details
| Mounting |
30.0 LB |
| Relief Valve Setting |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Cover End Flow @ RPM |
V2010-1F12S2S-11DD12 |
| Max. RPM [Max |
1 1/2 |
| Manufacturer Part No. |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Minor Diameter |
N/A |
| Shaft Seal Type |
0.875 in |
| Cover End Pressure [Max |
13 Tooth Splined |
| Port Type |
V2010 |
| Weight |
1 5/16 in |
| Model No. |
Buna-N |
| Port Size |
2400 |
| Shaft Type |
0.728 in |
| Rotation |
SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) |
Single Shaft Seal |
| Pressure Port Size, Cover End |
16/32 |
| Pump Series |
3000 |
| Seal Material |
2400 |
| Shaft End RPM [Max |
N/A |
| Pilot Type |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
0.873 in |
| Major Diameter [Max |
0.872 in |
| Shaft Length |
0.7335 in |
| Integral Valve Configuration |
0.7225 in |
| Shaft End Pressure [Max |
N/A |
| Major Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Controlled Flow Rate |
V2010-1F12S2S-11DD12 |
| Port Orientation - Shaft End |
2500 |
| Port Orientation - Cover End |
2200 |
| Pressure Port Size, Shaft End |
3 |
| Shaft Key |
18 |
| Spline Description |
N/A |
| Displacement Cover End (cu in/revolution) |
Outlet 135° CW from Inlet |
| Shaft Dia. |
Outlet 90° CW from Inlet |
| Minor Diameter [Min |
1/2 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End |
3/4 in SAE O-Ring |
| Minor Diameter [Max |
0.4 |
| Mounting Flange |
2.38 |