1.625 Inch | 41.275 Millimeter x 2 Inch | 50.8 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM268 Needle Non Thrust Roller Bearings
We Provide Extensive 1.625 Inch | 41.275 Millimeter x 2 Inch | 50.8 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM268 Needle Non Thrust Roller Bearings 1.625 Inch | 41.275 Millimeter x 2 Inch | 50.8 Millimeter x 0.5 Inch | 12.7 Millimeter Selection And Competitive Wholesale Pricing. Bearing Rolamentos do Brasil Ltda.
What is BAM268 bearing interchange?
Brand Name: |
IKO |
Model Number: |
BAM268 |
Port Orientation - Shaft End: |
101.0 LB |
Shaft End RPM [Max: |
Flange Mount |
Port Orientation - Cover End: |
Right Hand (CW) |
Shaft Key: |
4525VQ60A17-11BB20 |
Major Diameter [Max: |
3 1/2 |
Minor Diameter [Min: |
Flange |
Shaft Type: |
N/A |
Weight: |
Standard Pilot |
Product Details
Port Orientation - Shaft End |
101.0 LB |
Shaft End RPM [Max |
Flange Mount |
Port Orientation - Cover End |
Right Hand (CW) |
Shaft Key |
4525VQ60A17-11BB20 |
Major Diameter [Max |
3 1/2 |
Minor Diameter [Min |
Flange |
Shaft Type |
N/A |
Weight |
Standard Pilot |
Relief Valve Setting |
1.25 in |
Shaft Seal Type |
14 Tooth Splined |
Model No. |
4525VQ |
Mounting |
1.9375 in |
Cover End RPM [Max |
Buna-N |
Pump Series |
2200 |
Shaft Dia. |
1.04 in |
Major Diameter [Min |
SAE C, 2 Bolt |
Minor Diameter |
Single Shaft Seal |
Pilot Type |
12/24 |
Seal Material |
2200 |
Pressure Port Size, Cover End |
2200 |
Mounting Flange |
N/A |
Max. RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End |
1.248 in |
Port Size |
1.247 in |
Displacement Cover End (cu in/revolution) |
N/A |
Shaft End Pressure [Max |
N/A |
Minor Diameter [Max |
N/A |
Spline Description |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End |
4525VQ60A17-11BB20 |
Cover End Flow @ RPM |
3000 |
Integral Valve Configuration |
2500 |
Rotation |
25.5 |
Cover End Pressure [Max |
90 |
Manufacturer Part No. |
w/o Integral Valves |
Pressure Port Size, Shaft End |
Outlet 45° CCW from Inlet |
Displacement Shaft End (cu in/revolution) |
Outlet 90° CCW from Inlet |
Controlled Flow Rate |
1 in Flange |
Shaft End Flow @ RPM |
1 1/2 in Flange |
Shaft Length |
3.37 |
Port Type |
11.8 |